2001 stock ECU/injectors can handle boost?
#3
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,046
Total Cats: 6,607
Outside of the usual caveat that the O2 sensor will be fighting you as you add fuel, I can't see why an '01 ECU would be predisposed to freak out. It has no MAP sensor.
Is there a problem?
Is there a problem?
#4
2 Props,3 Dildos,& 1 Cat
Thread Starter
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
no problem (yet?)
and when I say stock, I mean stock. as in adding a turbo and leaving everything else (well, not the crossover pipe) stock. just wondering if it's possible to datalog the OBDII port and build a stock map with the turbo on so I don't have to change a bunch of crap back to stock.
and I can't wire the WG open, it's an external.
and when I say stock, I mean stock. as in adding a turbo and leaving everything else (well, not the crossover pipe) stock. just wondering if it's possible to datalog the OBDII port and build a stock map with the turbo on so I don't have to change a bunch of crap back to stock.
and I can't wire the WG open, it's an external.
#7
My car went dead lean under 3 psi last night. I removed the Voodoo box and was driving under the stock ECU. I stay out of boost when driving like that but wanted to see what would happen if I got into a little bit of boost. The wideband said my AFR went down to 17. Not saying this is correct or anything, but I won't be going into any boost under the stock ecu again. Gotta get MS working.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM