JasonC SBB

Where can I get these low profile banjo fittings, aside from ATP? (They are ~$20 each)

I need a fitting in a tight space. My ETD manifold has the flange almost 45° from vertical, so my current fitting will hit the mani if I don't clock the CHRA from vertical. (see photo of my setup in bottom).

Ideally I want a low profile fitting which goes down, then turns 90° towards the front of the car, end ends in a barb.

I'm thinking of using the first one below, then buying an NPT to plumbing style compression fitting: I will then flare the end of a copper pipe to mate to it, which goes down, then bends 90° towards the front of a car, then I push the 3/8" coolant hose onto it.

Banjo to NPT:
http://www.atpturbo.com/Merchant2/me..._Code=ATP-FTG1


or this:

Banjo to barb:
http://www.atpturbo.com/Merchant2/me..._Code=ATP-FTG1


Below is my setup. Note left hand coolant fitting, which turns up. There's not enough room to point it down, which is what I want. Note CHRA is clocked clockwise a bit to make the fitting clear the mani.

neogenesis2004

iTrader: (12)

have you looked on mcmastercarr?

bryantaylor

iTrader: (5)

summit racing

samnavy

iTrader: (7)

Summit Racing has about a $10 shipping fee no matter how small an item you buy. But they do send you a free hat and stickers on your very first order.

JasonC SBB

Did a search on Summit for "NPT Banjo" and got these, none of which is correct:

http://store.summitracing.com/egnsea...nresults=false

Stealth97

iTrader: (5)

is that your phone number?

kenzo42

iTrader: (6)

If so, I didn't know any mt members were in San Jose.

JasonC SBB

Heheh, you mean MAN Jose.

y8s

iTrader: (8)

haha

*checks cell phone*

double haha

JasonC SBB

Am I gonna get some stalkers now?