need quick response!!
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Sep 2010
Location: virginia beach, VA
Posts: 88
Total Cats: 0
need quick response!!
Okay so im doing the install on my turbo like i stated in previous thread. However, Im stuck with these damn injectors I have 305cc supra injectors. but there shorter than stock ones and when i have them all the way in, there is a little play with the injectors, is this safe? i have even removed both the spacers from the 2 bolts in the fuel rail.
#10
Glad you found the issue.
Very easy mistake to make...especially when reusing the rubber isolators on the bottom. I've gotten into the habit of just ordering new rubber anytime I touch the rail because not having them all sit flush can kill o-rings up top or cause them not to seal evenly.
Very easy mistake to make...especially when reusing the rubber isolators on the bottom. I've gotten into the habit of just ordering new rubber anytime I touch the rail because not having them all sit flush can kill o-rings up top or cause them not to seal evenly.
Thread
Thread Starter
Forum
Replies
Last Post
Greasyman
General Miata Chat
2
09-28-2015 10:44 AM