Go Back  Miata Turbo Forum - Boost cars, acquire cats. > Performance & Tuning > DIY Turbo Discussion
Reload this Page >

New Fabricated Exhaust (RSR Inspired/Turndown/56K WATCHOUT)

DIY Turbo Discussion greddy on a 1.8? homebrew kit?
Sponsored by:
Sponsored by:

New Fabricated Exhaust (RSR Inspired/Turndown/56K WATCHOUT)

 
Old 02-14-2009, 07:17 PM
  #1  
Junior Member
Thread Starter
iTrader: (6)
 
Join Date: Apr 2006
Posts: 257
Total Cats: 0
Default New Fabricated Exhaust (RSR Inspired/Turndown/56K WATCHOUT)

After two exhaust systems on the car over the few years I've had it the first one sounded great (magnaflow muffler) but looked horrible and the secound looked great but didn't sound as good. So in the search for the perfect exhaust I went back to the drawing board. Huge thanks to my friend Danny who did all the welding and made this possible!

2.5" Turbo Tony Downpipe (freshly installed w/new finish & band)
2.5" Custom Exhaust
- Magnaflow 2.5" Stainless Steel Straight In-Out Muffler
- 2.5" Aluminized Piping
- 2.5" Aluminized J-Bend (for homebrew mandrel bends)
- 3.5" Stainless Steel Mandrel 45 degree (was cut short to make tip)
- 2.5" Dual Eared Flange w/Gasket
- 3 Universal Heavy Duty Hangers
AEM UEGO







100% In List
kinggreg86 2.25" NA (CR; turndown)

50%/Soundclip List
silverslider (CR; turndown)
cny (CR; turndown)
Bonanza (CR; turndown)
Broketuner (CR; turndown)
mtdrift (CR; straight out)
wilsonjim15 (CR; turndown)
swales (CR; turndown)
slowstr8fastturns (CR; turndown)
The_Pipefather (MT; turndown)
NA6C-Guy (MT; turndown)
ZX-Tex (MT; turndown)
ChaserAero (MT; turnout if possible)
A Dingleberry Monstrosity (MT; turndown)

50% Axelback
Quinn
jdm slick

Notes
100% in will require a $125 deposit when 4 ppl are in at which point will max out at 6 ppl per building period. Exhausts will take 1-2 weeks to produce (some quicker than others being shipped but this is just an overall waiting period).

Soundclips
Rev: http://www.dp6061.com/temp/exhaust_rev.wmv
Flyby: http://www.dp6061.com/temp/exhaust_flyby.wmv

Last edited by danscreations; 02-17-2009 at 08:26 AM.
danscreations is offline  
Old 02-14-2009, 07:24 PM
  #2  
Elite Member
iTrader: (13)
 
cjernigan's Avatar
 
Join Date: Oct 2006
Location: Atlanta, GA
Posts: 8,140
Total Cats: 6
Default

Looks good like the rest of the car.
How's things down south man?
cjernigan is offline  
Old 02-14-2009, 07:26 PM
  #3  
Junior Member
Thread Starter
iTrader: (6)
 
Join Date: Apr 2006
Posts: 257
Total Cats: 0
Default

Originally Posted by cjernigan View Post
Looks good like the rest of the car.
How's things down south man?
Thanks man! Things are good; really can't complain. I miss being up there here and there but I guess from living here so long and knowing several ppl makes it home. You?
danscreations is offline  
Old 02-14-2009, 07:46 PM
  #4  
Elite Member
iTrader: (13)
 
cjernigan's Avatar
 
Join Date: Oct 2006
Location: Atlanta, GA
Posts: 8,140
Total Cats: 6
Default

I'm doing good, long line of things to do to the car this spring. Should start next week hopefully. Not working right now, getting ready to head to Alaska for the summer like I usually do. Graduated in December so now I'm trying to decide on grad school.
cjernigan is offline  
Old 02-14-2009, 07:49 PM
  #5  
Senior Member
iTrader: (5)
 
Join Date: Nov 2007
Location: Troy, MI
Posts: 854
Total Cats: 13
Default

Are you going to be mass-producing it? If you are, I want one.
The_Pipefather is offline  
Old 02-14-2009, 07:53 PM
  #6  
Senior Member
iTrader: (2)
 
Join Date: Aug 2005
Location: Granbury, TX
Posts: 562
Total Cats: 1
Default

My god that is a clean shop, oh and nice exhaust
greenday3437 is offline  
Old 02-14-2009, 07:59 PM
  #7  
Elite Member
iTrader: (1)
 
NA6C-Guy's Avatar
 
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,947
Total Cats: 43
Default

I would also be willing to pay for a duplicate, maybe in 3'' though. Thats one of the best looking exhausts Ive seen period, let alone on a Miata. Any sound clips?

Wanna build me one? I'll give you $500 for a cat back in 3'' stainless
NA6C-Guy is offline  
Old 02-14-2009, 08:12 PM
  #8  
Elite Member
iTrader: (8)
 
Join Date: Aug 2007
Location: Bellingham, Wa
Posts: 2,712
Total Cats: 3
Default

I think this may be how I end up fabbing my exhaust. Sound clips please!

Also, i love your wheels even though you cant exactly see them in these pictures. Saw them in a honda-tech thread.
wayne_curr is offline  
Old 02-14-2009, 08:22 PM
  #9  
Elite Member
iTrader: (22)
 
Join Date: Dec 2006
Location: Sunny Spanish speaking Non US Caribbean
Posts: 3,232
Total Cats: 3
Default

Dan; beautiful!

You have a way to make parts look like works of art.
Rafa is offline  
Old 02-14-2009, 09:53 PM
  #10  
Junior Member
Thread Starter
iTrader: (6)
 
Join Date: Apr 2006
Posts: 257
Total Cats: 0
Default

Originally Posted by Rafa View Post
Dan; beautiful!

You have a way to make parts look like works of art.
Thanks Rafa!
danscreations is offline  
Old 02-14-2009, 09:53 PM
  #11  
Junior Member
Thread Starter
iTrader: (6)
 
Join Date: Apr 2006
Posts: 257
Total Cats: 0
Default

For those that are interested; Just talked to Danny and he's interested in making more. Prices would run the following with 4-6 ppl in on them.

Base Version (catback)
2.25" NA $375.00
2.50" NA/Turbo $375.00
3.00" Turbo $400.00

Extended Version (cat deleted; I will extend to the header extension/downpipe)
2.25" NA $385.00
2.50" NA/Turbo $385.00
3.00" Turbo $410.00

Addons
2.25" Flex Coupler $45.00
2.50" Flex Coupler $50.00
3.00" Flex Coupler $55.00

Shipping will be $50.00 in the 48 cont. states.

The exhaust will be hand built and test fitted for quality. Will come with all hangers (use stock locations and chassis mounting areas), flanges, gaskets, and hardware. Due to shipping purposed the exhaust will have to be 2pcs instead of one so another flange or slip fit connection will be added. Flameproof Paint will be included to spray on arrival (keep from getting chipped up in shipping).

For those who are interested PM me and I'll start a list. Don't think it will take long to get 4-6 ppl.
danscreations is offline  
Old 02-14-2009, 10:27 PM
  #12  
Elite Member
iTrader: (15)
 
Join Date: Dec 2007
Location: San Antonio, Texas
Posts: 4,847
Total Cats: 28
Default

Hmmm.... I'm shopping for 3" systems right now. Would this pricing include NBs (1999) as well? How much to add a spun metallic Magnaflow cat to the midpipe, and an extra bung (rear O2 sensor)?
ZX-Tex is offline  
Old 02-14-2009, 10:43 PM
  #13  
Elite Member
iTrader: (12)
 
Join Date: Jan 2007
Location: Hermosa Beach, CA
Posts: 2,573
Total Cats: 11
Default

Originally Posted by danscreations View Post
For those that are interested; Just talked to Danny and he's interested in making more. Prices would run the following with 4-6 ppl in on them.

Base Version (catback)
2.25" NA $375.00
2.50" NA/Turbo $375.00
3.00" Turbo $400.00

Extended Version (cat deleted; I will extend to the header extension/downpipe)
2.25" NA $385.00
2.50" NA/Turbo $385.00
3.00" Turbo $410.00

Addons
2.25" Flex Coupler $45.00
2.50" Flex Coupler $50.00
3.00" Flex Coupler $55.00

Shipping will be $50.00 in the 48 cont. states.

The exhaust will be hand built and test fitted for quality. Will come with all hangers (use stock locations and chassis mounting areas), flanges, gaskets, and hardware. Due to shipping purposed the exhaust will have to be 2pcs instead of one so another flange or slip fit connection will be added. Flameproof Paint will be included to spray on arrival (keep from getting chipped up in shipping).

For those who are interested PM me and I'll start a list. Don't think it will take long to get 4-6 ppl.
Dammit, If I had the $$ I would..
cardriverx is offline  
Old 02-14-2009, 11:08 PM
  #14  
I'm Miserable!
iTrader: (5)
 
bryantaylor's Avatar
 
Join Date: Dec 2006
Location: jacksonville, fl
Posts: 1,711
Total Cats: 0
Default

as usual with your car, looks badass man!!!
bryantaylor is offline  
Old 02-14-2009, 11:12 PM
  #15  
Elite Member
iTrader: (1)
 
NA6C-Guy's Avatar
 
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,947
Total Cats: 43
Default

Id still like to hear it before saying yes on purchasing one. $400 seems like a good deal though.
NA6C-Guy is offline  
Old 02-14-2009, 11:24 PM
  #16  
Elite Member
 
Join Date: Feb 2008
Location: Victoria, BC
Posts: 2,318
Total Cats: 12
Default

Looks awesome. Great job!
dustinb is offline  
Old 02-14-2009, 11:51 PM
  #17  
Elite Member
iTrader: (24)
 
chriscar's Avatar
 
Join Date: Dec 2007
Location: Carrollton TX
Posts: 1,699
Total Cats: 13
Default

Originally Posted by greenday3437 View Post
My god that is a clean shop, oh and nice exhaust
Ok, here's what I was about to post.... Good LORD that's a clean shop. And nice exhaust.

So yeah, no need to now.

C
chriscar is offline  
Old 02-15-2009, 12:26 AM
  #18  
Senior Member
 
Join Date: Jun 2006
Location: Orlando FL - UCF
Posts: 684
Total Cats: 1
Default

Audio clip needed...

Looks AMAZING, and I will probably be copying it this summer as I absolutely love the way the RSR looks.

Yet again man, major thumbs up on your car.
coastertrav is offline  
Old 02-15-2009, 08:34 AM
  #19  
Elite Member
iTrader: (22)
 
Join Date: Dec 2006
Location: Sunny Spanish speaking Non US Caribbean
Posts: 3,232
Total Cats: 3
Default

Originally Posted by danscreations View Post
For those that are interested; Just talked to Danny and he's interested in making more. Prices would run the following with 4-6 ppl in on them.

Base Version (catback)
2.25" NA $375.00
2.50" NA/Turbo $375.00
3.00" Turbo $400.00

Extended Version (cat deleted; I will extend to the header extension/downpipe)
2.25" NA $385.00
2.50" NA/Turbo $385.00
3.00" Turbo $410.00

Addons
2.25" Flex Coupler $45.00
2.50" Flex Coupler $50.00
3.00" Flex Coupler $55.00

Shipping will be $50.00 in the 48 cont. states.

The exhaust will be hand built and test fitted for quality. Will come with all hangers (use stock locations and chassis mounting areas), flanges, gaskets, and hardware. Due to shipping purposed the exhaust will have to be 2pcs instead of one so another flange or slip fit connection will be added. Flameproof Paint will be included to spray on arrival (keep from getting chipped up in shipping).

For those who are interested PM me and I'll start a list. Don't think it will take long to get 4-6 ppl.

Dan; give me a couple of months to recoup from this rebuild and I'll be buying the 3" one from you. I'll contact you.

FWIW, I don't need a CAT.
Rafa is offline  
Old 02-15-2009, 10:08 AM
  #20  
Senior Member
iTrader: (3)
 
Join Date: Jan 2008
Location: Plano,TX
Posts: 670
Total Cats: 3
Default

Dan, I really like your design! I've been contemplating replacing my FM single tip with a lightweight, straight-through design like yours. My only concern is loudness on an n/a setup. I'm staying n/a until I can justify spending the $$$ on FI, and I love the simplicity of this setup.

Alot of us have shown interest in hearing a sound clip. If you can provide one, that would be great. I realize that it would be on a turbo car, too.
johnwag is offline  

Thread Tools
Search this Thread
Quick Reply: New Fabricated Exhaust (RSR Inspired/Turndown/56K WATCHOUT)


Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.