Newbie needing advice
Thread Starter
Newb
Joined: Mar 2016
Posts: 1
Total Cats: 0
Newbie needing advice
Hey Guys,
As you can tell I'm a little new around here and had a question regarding putting a turbo into my MK1 1.6 (BHP).
Like i said I'm a beginner when it comes to this and don't know very much about it, If i was to use a Garrett T25 along with a megasquirt ECU, with the rest being stock, what kind of power would i be looking at and what would be the most power i could get out of the stock internals?
Thanks in advance!
As you can tell I'm a little new around here and had a question regarding putting a turbo into my MK1 1.6 (BHP).
Like i said I'm a beginner when it comes to this and don't know very much about it, If i was to use a Garrett T25 along with a megasquirt ECU, with the rest being stock, what kind of power would i be looking at and what would be the most power i could get out of the stock internals?
Thanks in advance!
Reply
0
0
Check out Greg on YouTube at carpassionchannel. He has a budget build1.6 in progress and a DD 1.6 w 270ish whp. It's a simple info-entertainment kinda way to understand the NA6 and boost. Thanks to him and Marty n moog at mightycarmods, I'm about 2k into my turbo build.
Best of luck.
Best of luck.
Read the DIY FAQ thread before going further.
Reply
0
0
Junior Member
Joined: Jan 2016
Posts: 417
Total Cats: 67
From: Wadsworth, Ohio
Check out Greg on YouTube at carpassionchannel. He has a budget build1.6 in progress and a DD 1.6 w 270ish whp. It's a simple info-entertainment kinda way to understand the NA6 and boost. Thanks to him and Marty n moog at mightycarmods, I'm about 2k into my turbo build.
Best of luck.
Best of luck.
Come on Troy, this post is arguably disrespectful to everyone that participates on this forum.
Reply
0
0
Hey Guys,
As you can tell I'm a little new around here and had a question regarding putting a turbo into my MK1 1.6 (BHP).
Like i said I'm a beginner when it comes to this and don't know very much about it, If i was to use a Garrett T25 along with a megasquirt ECU, with the rest being stock, what kind of power would i be looking at and what would be the most power i could get out of the stock internals?
Thanks in advance!
As you can tell I'm a little new around here and had a question regarding putting a turbo into my MK1 1.6 (BHP).
Like i said I'm a beginner when it comes to this and don't know very much about it, If i was to use a Garrett T25 along with a megasquirt ECU, with the rest being stock, what kind of power would i be looking at and what would be the most power i could get out of the stock internals?
Thanks in advance!
spend an extra $300 on flowforce ev14 injectors and make 200whp.
Reply
0
0
Reply
0
0
15-16lbs on a 2871 or EFR. Talking about psi without any actual quantifiers is pretty useless.
Reply
1
1
Thread
Thread Starter
Forum
Replies
Last Post
