V-Band Flanges for Tial housing
#1
V-Band Flanges for Tial housing
One of my friends has a GT2871R with tial V-band housing on the way.
Can one of you guys that have one of these let me know what size v-bands the inlet and outlet is?
Also, are all v-band flanges the same? In other words, will a 3" v-band flange from company X ti with a v-band flange from company y?
Can one of you guys that have one of these let me know what size v-bands the inlet and outlet is?
Also, are all v-band flanges the same? In other words, will a 3" v-band flange from company X ti with a v-band flange from company y?
#7
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
Turbo Timmy used TiAL v-bands on my dp of course and I used v-band flanges from silicone intakes on the rest of the exhaust. All are sealed, but the TiAL flanges take a little more care to get lined-up, but fit right every time. Make sure you send the right flange of course, I believe the turbo is female on the inlet and the outlet.
#13
The last 4 manifolds we built used that size. The inlet and outlet are the same size, but use different clamps and flanges. Those were for GT2860, GT2871, and GT30 turbos. I call Tial, tell them what I need, and they tell me what to order. I try to make it as dummy proof as possible.
When I order parts from TiAL, this is what I have to order:
VBF300M 3" Weld on Outlet Flange
VC355 3" Outlet Clamp
VC300 3" Inlet Clamp
GTVFL3.0 3" Weld On Inlet Flange
According to my price sheets, the GT28/30/35 turbos all use the above flanges and clamps. The GT42/45 turbos go up to a 4" clamp and flange.
Stephanie
When I order parts from TiAL, this is what I have to order:
VBF300M 3" Weld on Outlet Flange
VC355 3" Outlet Clamp
VC300 3" Inlet Clamp
GTVFL3.0 3" Weld On Inlet Flange
According to my price sheets, the GT28/30/35 turbos all use the above flanges and clamps. The GT42/45 turbos go up to a 4" clamp and flange.
Stephanie
#16
Elite Member
iTrader: (9)
Join Date: Jun 2006
Location: Chesterfield, NJ
Posts: 6,902
Total Cats: 399
The last 4 manifolds we built used that size. The inlet and outlet are the same size, but use different clamps and flanges. Those were for GT2860, GT2871, and GT30 turbos. I call Tial, tell them what I need, and they tell me what to order. I try to make it as dummy proof as possible.
When I order parts from TiAL, this is what I have to order:
VBF300M 3" Weld on Outlet Flange
VC355 3" Outlet Clamp
VC300 3" Inlet Clamp
GTVFL3.0 3" Weld On Inlet Flange
According to my price sheets, the GT28/30/35 turbos all use the above flanges and clamps. The GT42/45 turbos go up to a 4" clamp and flange.
Stephanie
When I order parts from TiAL, this is what I have to order:
VBF300M 3" Weld on Outlet Flange
VC355 3" Outlet Clamp
VC300 3" Inlet Clamp
GTVFL3.0 3" Weld On Inlet Flange
According to my price sheets, the GT28/30/35 turbos all use the above flanges and clamps. The GT42/45 turbos go up to a 4" clamp and flange.
Stephanie
EDIT #8: You guys made 4 vband mani's so far? Damn I better step my game up.
#17
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
The last 4 manifolds we built used that size. The inlet and outlet are the same size, but use different clamps and flanges. Those were for GT2860, GT2871, and GT30 turbos. I call Tial, tell them what I need, and they tell me what to order. I try to make it as dummy proof as possible.
When I order parts from TiAL, this is what I have to order:
VBF300M 3" Weld on Outlet Flange
VC355 3" Outlet Clamp
VC300 3" Inlet Clamp
GTVFL3.0 3" Weld On Inlet Flange
According to my price sheets, the GT28/30/35 turbos all use the above flanges and clamps. The GT42/45 turbos go up to a 4" clamp and flange.
Stephanie
When I order parts from TiAL, this is what I have to order:
VBF300M 3" Weld on Outlet Flange
VC355 3" Outlet Clamp
VC300 3" Inlet Clamp
GTVFL3.0 3" Weld On Inlet Flange
According to my price sheets, the GT28/30/35 turbos all use the above flanges and clamps. The GT42/45 turbos go up to a 4" clamp and flange.
Stephanie
#20
Elite Member
iTrader: (9)
Join Date: Jun 2006
Location: Chesterfield, NJ
Posts: 6,902
Total Cats: 399
turbine inlet and turbine outlet flanges are not the same. Not even close. Sorta like saying BEGI's 3" downpipe is 3". OHH DAYUMM BBUUURNNNZZZZZEZEZZZZZZ! hehehe just bustin ***** steph
Each corresponding pair of flanges are the same obviously, one having a male lip and the other a female counterbore. The female end of each flange is part of the turbine housing.
Each corresponding pair of flanges are the same obviously, one having a male lip and the other a female counterbore. The female end of each flange is part of the turbine housing.