|
I would love fOr my car to skinflint a subie. I get comPliments as is but that would be sick. Yo.
|
Originally Posted by TurboTim
(Post 726508)
Ahh boy. Now I'm getting excited!!
EDIT: yeah that's similar to my exhaust; 3" magnaflow metal cat and 5x8x18" muffler. Drone at all? |
Tim, what's wrong with redoing your lower radiator hose? I did a simple job of mine.
http://gallery.y8s.com/d/22260-2/DSC00224.JPG It just goes down around a few things and then back up. I forget what hose I used but it had a nice simple j-hook shape. I then mated it to the cut stock hose with a dual barb end connector of the appropriate size from mcmaster. |
Originally Posted by y8s
(Post 726661)
Tim, what's wrong with redoing your lower radiator hose?
Nice job on your solution however. Can I buy your MIG for cheap? |
Originally Posted by TurboTim
(Post 726610)
subaru's tend to gain HP when switching to equal length mani's and no loss of spool or low end. Correct, 18psi?
. |
So say 5-10hp with my tiny 2560. If that's the case I'll turn up the boost 1psi. Worth the tone in that case. :dunno:
|
Originally Posted by TurboTim
(Post 726692)
Requires effort.
Nice job on your solution however. Can I buy your MIG for cheap? you want my mig? it's not worth it. there are better ones with variable current (not switches to make you angry) for about what I paid. it does do 110VAC though which is nice for light stuff. there's an ad in grassroots motorsports for a 110v eastwood for 299 if you mention the magazine. http://www.eastwood.com/mig-welder-1...5a-output.html seems like a decent deal. |
No drone on my old setup either....
|
No drone is good to know. Do either of you two have more pics of your manifolds? Would it clear A/C & P/S? Anything major have to be moved for it to fit?
|
shit dawg, mine clears, PS, AC and has an EGR bung.
http://gallery.y8s.com/miata/turbo/?g2_page=7 only thing I dont like about it is the wastegate placement on #4. it might be possible to do a collector-sourced gate pipe but it's tight in there. also note the size of my compressor and how it fits without a sawzall heh heh! |
4 Attachment(s)
my manifold WAS splitimes manifold. but i will give you this...
Attachment 188977 Attachment 188978 Attachment 188979 Attachment 188980 Cleared PS no problem with a 2860RS 0.86 I then upgraded to a 2871R Tial housing and it was fine too. I never ran AC so i cant comment on that. Edit: the hardest part was making an intake that would fit with a decent sized filter. i ended up running the filter under the headlight (headlight stationary) and the hot pipe through fender.... no decent pics of that. Edit 2: oh yeah... i modded my PS low pressure hjose since it wouldnt work with this manifold Edit 3: the manifold nut going on between cylinder #1 and #2 was a royal pain in the nuts to get to... figure this into future designs. |
Damn! I learn so much on this forum. That explains why my MSP3 sounds like a Subie. I've always wondered...
Weird manifold on that car too. Has some sort of accordion looking gizmo between the 2 sets of runners. No idea wtf that does. |
Originally Posted by y8s
(Post 726846)
shit dawg, mine clears, PS, AC and has an EGR bung.
only thing I dont like about it is the wastegate placement on #4. it might be possible to do a collector-sourced gate pipe but it's tight in there. also note the size of my compressor and how it fits without a sawzall heh heh!
Originally Posted by shlammed
(Post 726862)
my manifold WAS splitimes manifold. but i will give you this...
Cleared PS no problem with a 2860RS 0.86 I then upgraded to a 2871R Tial housing and it was fine too. I never ran AC so i cant comment on that. Edit: the hardest part was making an intake that would fit with a decent sized filter. i ended up running the filter under the headlight (headlight stationary) and the hot pipe through fender.... no decent pics of that. Edit 2: oh yeah... i modded my PS low pressure hjose since it wouldnt work with this manifold Edit 3: the manifold nut going on between cylinder #1 and #2 was a royal pain in the nuts to get to... figure this into future designs. Anyway, manifold is done, I have to order a 90deg silicone 2 to 2.5" transition and a tight R 3" bend for my downpipe...I have enough scraps to do the downpipe now but if I have to wait for the silicone then I may as well also get a new fresh bend. |
Tim it's time to make a collector pipe cut jig.
I'm sure you could come up with something that lets you vary the merge angle in both planes. of course the next challenge I have for you is a twisted collector. I will have a picture for you shortly. |
2 Attachment(s)
Looks similar to the ones Ric Stephens (RacingMazda) used to make. Your collector is much nicer though.
|
1 Attachment(s)
https://www.miataturbo.net/attachmen...1&d=1305313731
get that gas spinnin! and look how awesome and unequal your lengths are too. win win win. |
While you're at it why not go with some crazy shit like this? :P http://i.ytimg.com/vi/gFIHQdcbj-U/0.jpg
|
Done, I hope. It was nice to finally wash off the cutoff wheel dust. It sounds the same as it's always have, not a cool boxer-ish rumble of the other brand manifold posted earlier here in this thread. Oh well. I only drove it around my block twice to make sure there was no leaks and grind off the rust on the brake disks. So far it only makes about 3psi at 2000 whereas my previous manifold, my replacement BEGI/FM tubular manifold, would make 5 or so. I may go out to get a ritas and play with it. Or I may drink some beers. :dunno:
More pics here: ABSURDflow highmount A/C P/S http://www.absurdflow.com/miata/acps...ighmount13.jpg ATP sent me a black silicone 90 instead of a blue which was even on the packing list in the box, oh well. I also have to throw on the toyota COPs, maybe. |
Flipping the pipe between the black and the blue might give you a bit more room so the black hose isnt that sharply bent?
|
All times are GMT -4. The time now is 12:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands