Summer Plans: Pics to come
#1
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: NoVA
Posts: 2,299
Total Cats: 2
Summer Plans: Pics to come
So about this time last year I bought a full greddy setup and made pretty decent power out of my miata (something like 170 rwhp). With braineack's constant urging I decided to get a wideband, then I bought megasquirt. Well I finally lost my mind and bought a T-25 w/ full 3 inch downpipe, megasquirt, and 550cc injectors. I'll post some pics when I can steal his camera to take them but the thing is beautiful. I picked up the setup sunday and had the car up on jackstands today tearing it apart. I'll photo document the build for your entertainment.
Last edited by Newbsauce; 03-15-2007 at 08:43 AM.
#3
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: NoVA
Posts: 2,299
Total Cats: 2
ts a t28 from an SR20, brain is bringing the cam tomorrow so I will post pics of the manifold/turbo/dp.
*After research I learned it is more like a large t25*
*After research I learned it is more like a large t25*
Last edited by Newbsauce; 03-15-2007 at 08:44 AM.
#6
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,080
If I didn't already have my hands full of my own projects, I dont even have time to put in my new clutch/flywheel/1.8 diff.
Setup should be a vast improvement over the Greddy kit with a HKS VPC controller.
just gotta rip out the BEGi FMU, MSD controller, VPC, wire up the FP and
AIT sensor and install that junx and we'll be in business.
#7
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: NoVA
Posts: 2,299
Total Cats: 2
3/5/2007- 4:30p
I got the car up on jackstands (no pics from today) but I got most everything disconnected. Got a bit dark so I called it a night to go inside and stare at the turbo.
*UPDATE* 3:30am- a tow truck was reported to the police sitting outside my car with the lights off, apparently an individual got out and was walking around my car.
I got the car up on jackstands (no pics from today) but I got most everything disconnected. Got a bit dark so I called it a night to go inside and stare at the turbo.
*UPDATE* 3:30am- a tow truck was reported to the police sitting outside my car with the lights off, apparently an individual got out and was walking around my car.
#8
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: NoVA
Posts: 2,299
Total Cats: 2
3/6/2007- 9am
I was sitting at work and my roommate calls me and informs me there is another tow truck outside and that i'm in danger of being towed. I come home. I removed the turbo and manifold and took the damn thing off jacks. By the way it is like 30 degrees and my hands are now numb hah.
I was sitting at work and my roommate calls me and informs me there is another tow truck outside and that i'm in danger of being towed. I come home. I removed the turbo and manifold and took the damn thing off jacks. By the way it is like 30 degrees and my hands are now numb hah.
#12
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,080
Take a look at this junk
downpipe and manifold were built by someone who knew what they were doing. Still trying to figure out how they bent & shaped the first 90* so perfectly. Vast improvement
Last edited by Braineack; 10-02-2007 at 03:01 PM.
#18
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: NoVA
Posts: 2,299
Total Cats: 2
Yeah but a townhouse in manassas is far as hell from where I work. Plus its still manassas. No offense but theres really nothing in manassas outside of City Tavern (where I picked up a 32 yr old married chick at age 21) and O'mera's (where I met her husband, the coke dealer)
#19
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: NoVA
Posts: 2,299
Total Cats: 2
3/8/07 - So it snowed putting an extreme damper on my plans. I did go to walmart and pick up a dremel, which I will be using to sand down the inside lip of the downpipe (see pic) and some of the car body where the downpipe might hit. I also bought a set of standard wrenches. Why? because i have ONE bolt on the turbo that is standard and is impossible to ratchet. Put in a call to Gpopshop.com to try to find the size of the damn oil feed fitting. At this point Braineack and I are stumped as we have heard about 400 different sizes for this stupid fitting.
#20
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: NoVA
Posts: 2,299
Total Cats: 2
Well this weekend I made some major headway:
The oil feed and fittings were ordered friday (for future reference the T-28 uses a 7/16ths fitting)
I ported the 3" downpipe (cause it wasnt big enough) and ported the exhaust manifold a little bit. I then began clocking the turbo and mounting it. I'm going to modify Stripe's pipes kit to fit and then run the water lines. Basically the only remaining task is for the oil lines to come in. I will get the car up and running w/ the supra injectors and have a 3" pipe made to the cat-back. Then its on to the megasquirt/550ccs! I will post pics tonight of my work this weekend including my newly mounted BEGI radiator panel (the sex0r)
The oil feed and fittings were ordered friday (for future reference the T-28 uses a 7/16ths fitting)
I ported the 3" downpipe (cause it wasnt big enough) and ported the exhaust manifold a little bit. I then began clocking the turbo and mounting it. I'm going to modify Stripe's pipes kit to fit and then run the water lines. Basically the only remaining task is for the oil lines to come in. I will get the car up and running w/ the supra injectors and have a 3" pipe made to the cat-back. Then its on to the megasquirt/550ccs! I will post pics tonight of my work this weekend including my newly mounted BEGI radiator panel (the sex0r)