Originally Posted by Loki047
(Post 195723)
Darnit. I thought the GT2560 was refered as the GT28. Or am i reaching here?
the 2560 has a 60mm wheel. which technically would make it a t28. it shares more in common with the 2854 or 2860 than the 2554. |
Originally Posted by TurboTim
(Post 196406)
splitime. tial 38mm's are cheap, around the cost of the turbine housing new if you could get it.
|
I can make a local deal for the turbine housing... I also have a used SSautocrome tial 38mm knockoff that I'd sell for a couple more bucks...
|
so i take it you bought that 2560 with the odd turbine housing?
|
Originally Posted by Braineack
(Post 196448)
so i take it you bought that 2560 with the odd turbine housing?
I haven;t even gotten the turbo yet, so I am not in a huge hurry. for all i know it fits the manifold and dp. Doest anyone have a good picture of the DP flange that standard GT25s use? |
|
|
looks like the ones on the GT-iR housings off the JDM GTRs
|
Since my downpipe is two piece maybe beig will work out a deal with me for just the top peice with that flange (assuming it fits the maniflold)
Or just buy a trashed T25 |
want a sleeve turbo with the same specs as a 2560?
|
if i can rip the turbine housing and use it sure.
|
Resell your odd turbo on ebay and buy this:
https://www.miataturbo.net/forum/showthread.php?t=14084 You said yourself you wanted it. Do it. You deserve it. You're a great guy. You only live once, may as well have the big turbo. |
Originally Posted by Loki047
(Post 196481)
if i can rip the turbine housing and use it sure.
it wouldn't be a turbo to rip apart. you can always buy an old junker like this: http://cgi.ebay.com/ebaymotors/Nissa...spagenameZWDVW turbine is something like 44mm, should be the same: http://www.boostedmiata.com/lars_t25/larst25004.jpg |
but then i saw the power paul was making :)
No i think ill see how this turbo is and my options. I just like to plan ahead Anyone see anything wrong with getting a trashed T2 turbine housing? Brain unless its free id have to pass now, or ungodly cheap |
Originally Posted by Loki047
(Post 196493)
but then i saw the power paul was making :)
I honestly don't know much about the T2 turbos or if they have that 6 bolt center section-to-turbine housing flange. |
To be honest, i just wanted the cheaper turbo option to get up and running
|
Oh heres the specs off the turbo
Compressor In: 1.83" Ex: 2.638" Turbine In:2.083" Ex:1.824" Whatever Splitime had it definitely didn't fit (I wonder if it was a normal T2 turbine?) Thanks for letting me give that a try |
2.638" is what 67mm? that's bigger than a 2860.
however the turbine seems to be the same size as a 2554. |
what crappy ass combo. God i hope i can get a different housing
Tim can you take some measurements off that GT2871 you have and see if that housing is the same? |
Ignore everything i wrote. I am so fucking sick. I cant even think straight.
|
All times are GMT -4. The time now is 03:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands