Hi, my name is Jake and I'm new to this site and I'm currently planing a turbo build on my '94 Mazda Miata. I've had it for a few months its time. It has a 1.8 and where can I hook up the high pressure oil feed line?

 

Either the port on the driver side of the block by the trans, or you tee off the oil pressure sender with a TSE adapter.

 

Might I recommend a bit of light reading: DIY FaQ - All your answers in one big post

 

Might I recommend a bit of heavy reading: https://www.miataturbo.net/