Notices
DIY Turbo Discussion greddy on a 1.8? homebrew kit?

Turbo NA6 under construction questions - Fuel mixture related

Old Aug 25, 2014 | 02:46 PM
  #1  
ennjay's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Nov 2013
Posts: 85
Total Cats: -8
Default Turbo NA6 under construction questions - Fuel mixture related

Just wanting to confirm:

are the 1.8 Tan top injectors simply plug and play on a 1.6?

Is the o2 clamp necessary under 7psi boost?

Is the o2 clamp necessary when running a MSpnp?

Any significant impacts should one not run an o2 clamp?
Old Aug 25, 2014 | 06:33 PM
  #2  
Twodoor's Avatar
Senior Member
iTrader: (2)
 
Joined: Mar 2014
Posts: 628
Total Cats: 44
From: Meridian, Mississippi
Default

Originally Posted by ennjay
Just wanting to confirm:

are the 1.8 Tan top injectors simply plug and play on a 1.6?

Is the o2 clamp necessary under 7psi boost?

Is the o2 clamp necessary when running a MSpnp?

Any significant impacts should one not run an o2 clamp?
Spoon feeding in progress

From what I have read injectors are plug and play.

O2 clamp is used to fool stock ECU. If you are going Megasquirt not needed. You do have a wide band O2 sensor right? If not, purchase one before doing anything else!

Keith
Old Aug 28, 2014 | 01:21 PM
  #3  
ennjay's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Nov 2013
Posts: 85
Total Cats: -8
Default

I guess what I was trying to get at is if I could get away from not buying an O2 clamp since I plan on going with a MS shortly. Id like to drive the car around pre MS and not blow things up... of course keeping boost down to a conservative level.
Old Aug 28, 2014 | 01:28 PM
  #4  
concealer404's Avatar
Elite Member
iTrader: (3)
 
Joined: Aug 2011
Posts: 10,917
Total Cats: 2,206
Default

You're doing it backwards. If you're going to do one before the other, MS goes on first. You learn to use MS. THEN you install turbo kit.

This way you don't run around with stupid bandaids on your car and avoid blowing it up.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FAB
Prefabbed Turbo Kits
216
Mar 22, 2017 04:00 PM
zephyrusaurai
Meet and Greet
2
Sep 28, 2015 10:59 PM
ScrapinMX5
Meet and Greet
8
Sep 28, 2015 01:04 PM
Motorsport-Electronics
ECUs and Tuning
0
Sep 5, 2015 08:02 AM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 10:34 AM.