Unboxing my ChinaCharger
9 Attachment(s)
FedEx just arrived leaving me with my nifty new chinacharger - no shaft play, spins well, fit n finish looks good. Next I will take it apart and inspect it all.
https://www.miataturbo.net/attachmen...ine=1330473377 Double boxed - Good to see that http://imageshack.us/photo/my-images...180347171.jpg/ SR20 18G (T05 18G) http://imageshack.us/photo/my-images...180423309.jpg/ Came with extras https://www.miataturbo.net/attachmen...ine=1330473377 https://www.miataturbo.net/attachmen...ine=1330473377 https://www.miataturbo.net/attachmen...ine=1330473377 https://www.miataturbo.net/attachmen...ine=1330473377 https://www.miataturbo.net/attachmen...ine=1330473377 https://www.miataturbo.net/attachmen...ine=1330473377 https://www.miataturbo.net/attachmen...ine=1330473377 https://www.miataturbo.net/attachmen...ine=1330473377 |
Are the second two images not working for anyone else?
Have you verified dp flange fitment? |
Also in to see if it has the offset downpipe bolt fitment. Also where did you get?
|
Originally Posted by curly
(Post 841152)
Are the second two images not working for anyone else?
Have you verified dp flange fitment? Yes dp flange alignment is right on. I was worried about that! |
Originally Posted by FRT_Fun
(Post 841155)
Also in to see if it has the offset downpipe bolt fitment. Also where did you get?
|
impressive. Is this going on a known Garrett flange? Like something from Abe, FM, or Begi?
|
2 Attachment(s)
Originally Posted by curly
(Post 841168)
impressive. Is this going on a known Garrett flange? Like something from Abe, FM, or Begi?
https://www.miataturbo.net/attachmen...ine=1330478092 https://www.miataturbo.net/attachmen...ine=1330478092 |
Nice, you are luckier than I.
|
Originally Posted by curly
(Post 841194)
Nice, you are luckier than I.
|
Originally Posted by blaen99
(Post 841195)
Us, he means. Tempted to order this, but at $400, I may as well go for a genuine turbo.
|
I'm glad to see it's a Godspeed, and even happier that it's journal bearing. If this was a china ball bearing unit, I would say "enjoy your first 200 miles, cause they're going to be your last 200 miles".
|
Compared to the Begi JDMSport turbo....I like Begi more.
|
Originally Posted by thirdgen
(Post 841281)
I'm glad to see it's a Godspeed, and even happier that it's journal bearing. If this was a china ball bearing unit, I would say "enjoy your first 200 miles, cause they're going to be your last 200 miles".
|
Originally Posted by romanservices
(Post 841190)
Using a cast BEGi, Xede, 550cc Inj, FM head w/ Oversized valves, Eagle H beams blah blah blah.... it's built
It looks like you are going under the lights with the inter-cooler piping? I haven't seen too many like this but it made sense to me also. http://i578.photobucket.com/albums/s...3/P1020677.jpg |
Hey guys, I am currently running a JRSC M45 and am thinking about going turbo. This is a link to a Godspeed on Amazon, is it junk?
I have a OBX header that seemed to be of good quality, could the same be said for their turbo manifold? http://www.ebay.com/itm/OBX-Racing-T...item1e6b1d1b9e I notice that some of the (Greddy) have the oulet horizontal vs this one being at an angle. What difference does this make in deciding what turbo to buy and differences in installation? Any and all thoughts and help on this stuff is appreciated. |
The turbo looks fine, no promises on the dp flange fitting, but it looks fine. The manifold is junk. The difference between a header and a manifold is the manifold needs to support the weight of the turbo, so the design needs to be better and stronger than a cheap header.
|
whats up with the elephant man compressor housing?
|
It's ftw.
|
keep it goin!
|
took me long enough but the turbo is in the car. Sorry fro the crappy pictures it was dark out when I took them with my phone. Ignore the funky oil feed line, I could not use my origional setup due to different threads so I came up with this for a temp solution.
DP fit fit perfect!! http://dl.dropbox.com/u/64840776/201...3-26-12_94.jpg http://dl.dropbox.com/u/64840776/201...-25-59_313.jpg http://dl.dropbox.com/u/64840776/201...3-26-44_93.jpg http://dl.dropbox.com/u/64840776/201...-26-53_946.jpg http://dl.dropbox.com/u/64840776/201...-26-19_948.jpg |
All times are GMT -4. The time now is 06:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands