Notices
DIY Turbo Discussion greddy on a 1.8? homebrew kit?

Vaccum signal?

Thread Tools
 
Search this Thread
 
Old Sep 22, 2014 | 09:31 PM
  #1  
Claybay09's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2014
Posts: 51
Total Cats: -3
From: Pleasant grove, utah
Default Vaccum signal?

So I'm pretty retarded and gave my car aids! With that being said; where do I pull the vaccum signal for the msd box and rrfpr?
I went off the extra nipple on the intake manifold. Now I'm thinking that's pretty stupid. Should I tap into the wastegate line instead?
Old Sep 23, 2014 | 11:06 AM
  #2  
Girz0r's Avatar
Moderator
iTrader: (1)
 
Joined: Jun 2014
Posts: 3,034
Total Cats: 323
From: Austin, TX
Default

I'll do my best to answer.

aids... magic ecu box? Supercharger?

msd box, ignition box?

rrfpr = boost needed.

extra nip... Small or large? Location front or rear of manifold?

wastegate line?............ If this is a turbo setup Id say no, personally I'd make sure the wastegate and rrfpr have their own source, or use a multi port vac/boost box with a large source connected to the manifold.
Old Sep 23, 2014 | 11:08 AM
  #3  
Braineack's Avatar
Boost Czar
iTrader: (62)
 
Joined: May 2005
Posts: 80,552
Total Cats: 4,368
From: Chantilly, VA
Default

tee off the FPR.

/thread.
Old Sep 23, 2014 | 11:51 AM
  #4  
Claybay09's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2014
Posts: 51
Total Cats: -3
From: Pleasant grove, utah
Default

Yeah the msd retard box and fmu.
And it's the extra nip right after the tb.
Old Sep 23, 2014 | 12:30 PM
  #5  
DNMakinson's Avatar
Elite Member
iTrader: (3)
 
Joined: Jan 2013
Posts: 5,030
Total Cats: 861
From: Seneca, SC
Default

Originally Posted by Braineack
tee off the FPR.

/thread.
Scott. On my 99, I plan to add return with NA FPR. So, presently, there is no FPR line. Certainly I see great virtue in the FPR and the MAP sensor seeing the same information.

Which port on a '99 head would you suggest I use?
Old Sep 23, 2014 | 02:36 PM
  #6  
Claybay09's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2014
Posts: 51
Total Cats: -3
From: Pleasant grove, utah
Default



This is where I'm connected to.
Old Sep 23, 2014 | 03:51 PM
  #7  
hornetball's Avatar
Elite Member
iTrader: (4)
 
Joined: Mar 2008
Posts: 6,301
Total Cats: 697
From: Granbury, TX
Default

That's fine.

Nice undertray.
Old Sep 23, 2014 | 05:00 PM
  #8  
Claybay09's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2014
Posts: 51
Total Cats: -3
From: Pleasant grove, utah
Default

Yes I know. That and one for the top of the radiator will be made soon out of acm.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
Oct 26, 2018 11:00 PM
Itty
MSPNP
6
Sep 22, 2015 11:02 AM
ndragun
MEGAsquirt
0
Sep 20, 2015 10:28 PM
Dobzeh
ECUs and Tuning
5
Sep 17, 2015 02:56 PM
E=MC^2
AEM
1
Sep 17, 2015 12:34 PM




All times are GMT -4. The time now is 04:01 PM.