Weld turbo to manifold - bad idea?
#1
Weld turbo to manifold - bad idea?
Now wait I know this would be a bad idea under most circumstances but listen.
I got the old style Begi manifold that fits the areodyne turbo. I got a T3 turbo believing the manifold could be modified to fit "any" turbo. After getting both I learned from Begi that they couldn't modify it to fit a T3 only a T25.
In measuring and looking at both the main issue would be no room for bolts and nuts on the backside of the manifold to attach the T3. So I thought perhaps holes in the front and have a shop drill and tap studs in the back. Well in calling welding shops it is extremely expensive to use the right welding rods to weld mild steel to cast iron and with the labor included it would cost about as much if not more than a brand new cast 1.6 T3 manifold. So not really an option.
See the problem is I began this DIY turbo build with the idea of getting a basic turbo setup going for as little dough as possible. So my options:
#1 Send the mani to Begi to be modified to fit a T25 - $100 + shipping back and forth. then find a T25 (nissan type) which so far I haven't been able to find for less than $200 so lets so all together this option will be around $400.
#2 If I can have the turbo welded to the mani cost $??? I don't know but I cant imagine more than $100.
The issue is that while I think I can get my money back on the T3 at this point if I use option #1 if I don't use the manifold I don't think anyone else would want it so I would be eating the $150 I paid for it.
So I am leaning towards just welding them together (if it's possible) and running the turbo until it goes and then I will find a different mani and turbo. I only paid $110 for the T3 and with the cost of the manifold it's $260 even if this just gives me one summer of turbo fun and I replace them over the next winter it seems worth it as opposed to spending any additional $$$ now (money is short).
Time is also a factor modifying the mani and finding a T25 or finding a T3 mani that fits my budget ( i am trying to stay away from the cheap SS ebay manis )will take who knows how long as well, warm weather is here so......
So what do you guys think? Crazy or plausible?
I got the old style Begi manifold that fits the areodyne turbo. I got a T3 turbo believing the manifold could be modified to fit "any" turbo. After getting both I learned from Begi that they couldn't modify it to fit a T3 only a T25.
In measuring and looking at both the main issue would be no room for bolts and nuts on the backside of the manifold to attach the T3. So I thought perhaps holes in the front and have a shop drill and tap studs in the back. Well in calling welding shops it is extremely expensive to use the right welding rods to weld mild steel to cast iron and with the labor included it would cost about as much if not more than a brand new cast 1.6 T3 manifold. So not really an option.
See the problem is I began this DIY turbo build with the idea of getting a basic turbo setup going for as little dough as possible. So my options:
#1 Send the mani to Begi to be modified to fit a T25 - $100 + shipping back and forth. then find a T25 (nissan type) which so far I haven't been able to find for less than $200 so lets so all together this option will be around $400.
#2 If I can have the turbo welded to the mani cost $??? I don't know but I cant imagine more than $100.
The issue is that while I think I can get my money back on the T3 at this point if I use option #1 if I don't use the manifold I don't think anyone else would want it so I would be eating the $150 I paid for it.
So I am leaning towards just welding them together (if it's possible) and running the turbo until it goes and then I will find a different mani and turbo. I only paid $110 for the T3 and with the cost of the manifold it's $260 even if this just gives me one summer of turbo fun and I replace them over the next winter it seems worth it as opposed to spending any additional $$$ now (money is short).
Time is also a factor modifying the mani and finding a T25 or finding a T3 mani that fits my budget ( i am trying to stay away from the cheap SS ebay manis )will take who knows how long as well, warm weather is here so......
So what do you guys think? Crazy or plausible?
#2
Here are some pics:
It looks like the oil lines are almost vertical the way the turbo would mount as is would I still need to clock it?
Also on the exhaust side if I take that thing with the three studs off would I then be able to use the standard T25 dump pipe/j pipe thing down pipe? I know mine is a T3 but that looks like the T25 exhaust side if you take that off?
It looks like the oil lines are almost vertical the way the turbo would mount as is would I still need to clock it?
Also on the exhaust side if I take that thing with the three studs off would I then be able to use the standard T25 dump pipe/j pipe thing down pipe? I know mine is a T3 but that looks like the T25 exhaust side if you take that off?
#4
2 Props,3 Dildos,& 1 Cat
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
wait, sorry. what I meant was
welding cast iron is a crap shoot at best. chances are you'll get a few hundred miles and then it'll crack. and then it'll crack enough to make you regret doing it. even done right, it's still not very strong / crack resistant.
welding cast iron is a crap shoot at best. chances are you'll get a few hundred miles and then it'll crack. and then it'll crack enough to make you regret doing it. even done right, it's still not very strong / crack resistant.
#7
I would like to do that but look at this picture, on what I call the back side where the two studs are coming out if I drill into there its right inside the manifold. Could I drill the mounting plate for the turbo to fit the existing studs and drills holes in the mani on the other side to accomadate the T3 holes or would this weaken the mani too much?
#15
for what it's worth, the previous owner of my car welded the turbo to the manifold. It has survived being on a heavily run turbo car for almost 2 years on constant abuse, drag strip runs, and autox. In fact, i really wanted to break them apart and use hardware, but the weld appears to be very well done. Hey, if it's lasted this long......