will the greddy egt probe fit in the begi egr port?
#8
Actually i just pulled out my Begi mani. The fitting that is there for the EGR tube to connect two it has two parts. The outer threaded sleeve that they weld on and the internal cone that has a very small opening. The hole itself that allows exhaust gas into the egr port is small enough that you could easily drill it to the appropriate size and tap it for the EGT probe. To be able to tighten the probe very well you would most likely want to cut off the outer threaded ring though. Easy enough with a grinder or sawzall or both.
#10
Former Vendor
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,100
..just drill a hole in the bottom of the manifold and tap it. This has worked perfectly for me. Pretty sure it's how BEGI does it.
Edit: Stephanie sent me this photo when she asked where I wanted my EGT hole drilled as a recommended location.
Edit: Stephanie sent me this photo when she asked where I wanted my EGT hole drilled as a recommended location.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM