A bit of a start, 1.8 gt2554
#1
A bit of a start, 1.8 gt2554
So I finally got my car properly tuned after a year of running the MS on it. I took the car to a local tuning shop called UMS Tuning and those guys are the ****. The car is much faster, but it definitely still needs some tweaking.
It is having some serious boost drop off, which is hopefully due to the low psi waste gate actuator! Because of this we didn't run much timing and I will definitely be making a trip back there soon. Thoughts?
(link to same photos)
http://imgur.com/xpPNc&gyjG5
It is having some serious boost drop off, which is hopefully due to the low psi waste gate actuator! Because of this we didn't run much timing and I will definitely be making a trip back there soon. Thoughts?
(link to same photos)
http://imgur.com/xpPNc&gyjG5
#8
My current setup is 1.8l, Gt2554, Flyin Miata IC, Megasquirt, 440s, Cat-less Enthuza 2.5', begi s downpipe and manifold. I actually have some fancy turbo xs dual adjustable boost controller. This is the best boost that we could get with it. My goal is a smoother curve and to hit 200whp.
I'm going to try an 8psi actuator and hope that its strong enough to hold..
Heres my spark map:
Do you guys think that a better flowing manifold and down pipe would make a huge difference on this setup/turbo?
I'm going to try an 8psi actuator and hope that its strong enough to hold..
Heres my spark map:
Do you guys think that a better flowing manifold and down pipe would make a huge difference on this setup/turbo?
#9
From what I've read/heard TurboXs is a "bleed type" mbc and is junk. No personal experience with one, but I'd try a known good ball/spring one like a hallman es or the nxs ones many of us are using.
as for gains from less restrictive exhaust: yes the gains should be pretty decent.
I'd focus on your boost issue for now, and try to get more power out of the setup as is. You should be well in the 200-220whp range even with the 2.5 exhaust
*edit: doens't look like your spark map is too conservative either
as for gains from less restrictive exhaust: yes the gains should be pretty decent.
I'd focus on your boost issue for now, and try to get more power out of the setup as is. You should be well in the 200-220whp range even with the 2.5 exhaust
*edit: doens't look like your spark map is too conservative either
#10
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,177
Total Cats: 1,681
That was my SR20 t25 which is very close to a gt2554 on a begi s1 kit at 9psi. Running Megasquirt with 440cc injectors on a stock 94 block. The only big difference between what you have and I had are the different downpipes and I have a 3" Enthuza exhaust. Below is my final tuned spark map.
#11
Yeah the turbo xs one that I have is the bleed type, and it is my first experience with one. I can give a different type of boost controller a try, I had better luck with a 5$ home depot brass special ha. (Although external wastegate setup on completely different car). It wouldn't hurt to give a halman or something a try. Surprisingly the dude who tuned it was stoked on the turboxs unit though.
Yeah the spark map on mine doesn't seem very conservative at all. I'll have to get the boost issue sorted and then go back to the dyno.
Shuiend, that looks like some nice power for that setup. Thanks for posting your spark map! What kind of dyno is that on?
Would a 10psi waste gate actuator be proper for this setup?
Yeah the spark map on mine doesn't seem very conservative at all. I'll have to get the boost issue sorted and then go back to the dyno.
Shuiend, that looks like some nice power for that setup. Thanks for posting your spark map! What kind of dyno is that on?
Would a 10psi waste gate actuator be proper for this setup?
#12
Former Vendor
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,100
Feed that turbo a LOT of timing up top. The compressor is tapped out by ~5500 or so so you can run a huge amount of timing and prop the torque curve up with it.
My '99 GT2554R spark map - please don't just copy it, but look at the numbers and see where you can turn it up a bit on your next trip to the dyno.
My '99 GT2554R spark map - please don't just copy it, but look at the numbers and see where you can turn it up a bit on your next trip to the dyno.
#13
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,204
Total Cats: 1,138
Where's the boost source for the waste gate? If it's from the compressor, block it off and source the boost from right before the throttle body. Don't waste time on a MBC or new wastegate before you do that.
Thread
Thread Starter
Forum
Replies
Last Post