So I was able to dyno my car and in the end, last run made 148hp and 139tq
Still needs tuning
first pull made 136hp and 129tq
I will scan the dyno sheet in a picture tomorrow


Uploaded with ImageShack.us

 

JK. Good numbers for your budget. What psi was that at?

 

7psi, tapers off to 5psi and comes back on later to 6psi

I'm gonna work on the wastegate and see if that helps with the noise up top. Also check my couplers and anything in the intake tract

 

What's your boost source?

 

compressor housing, gonna change it to pre tb, post ic

 

That'll help a lot. Any problem anyone has about anything, first thing you ask.

 

Garrett T3 "60 trim"

compressor trim: 60
Compressor Inducer: 1.830
Compressor Exducer: 2.367
Turbine Exducer: 1.898
Turbine Inducer: 2.319
stage 1 turbine wheel

.48 ar turbine housing
orginally .63 ar turbine housing, but odd old nissan bolt pattern