EMB wire harness for EMU
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Sep 2006
Location: Hong Kong
Posts: 523
Total Cats: 0
EMB wire harness for EMU
I've been using an EMB and looking out for opportunity to get an EMU upgrade, I would like to know if the EMB harness works on EMU? Will it be PNP?
Any wires that is needed to modify?
Thanks,
Any wires that is needed to modify?
Thanks,
#2
http://www.greddy.com/img/PHP/products/pdf/806.pdf
page 12 of this link has the EMU wiring harness. and you should have the wiring for EMB if you are running it. put them side by side and compare.
page 12 of this link has the EMU wiring harness. and you should have the wiring for EMB if you are running it. put them side by side and compare.
#3
I will do the same thing soon.
I made myself a little wiring scheme and it should'nt be too complicated.
You have to cut the 4 injector wires and rewire the injector side to a new connetor C of the EMU. Also you have to wire in two new wires to connector C - water temp and (maybe) knock.
All in all there should be 6 new wires (and of course the connector) to be wired in.
Greets
I made myself a little wiring scheme and it should'nt be too complicated.
You have to cut the 4 injector wires and rewire the injector side to a new connetor C of the EMU. Also you have to wire in two new wires to connector C - water temp and (maybe) knock.
All in all there should be 6 new wires (and of course the connector) to be wired in.
Greets
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM