trito

iTrader: (1)

Hi guys,

So I got some 330(326)cc injectors from a 626 turbo and had them cleaned and tested. The results are

330ccinjectors.jpg

Am I reading this right? 95 X 4 = 380?! If they are flowing at 380cc then can I plug in 380cc in the E-manage or should I leave it at 330?

cjernigan

iTrader: (13)

Man, those are some good injectors flowing that well within each other. Good thing you got them serviced, injector 1 was bad news.

I would enter the actual flow rate.

Braineack

iTrader: (62)

nice, (4) 380cc injectors.

1mL = 1cc

60sec / 15sec = 4

96 x 4 = 380

msydnor

iTrader: (3)

Where did you have yours done. I have a set of 460's I need to get done.

trito

iTrader: (1)

www.cruzinperformance.com

is where I got mine done but you can also send it to

www.witchhunter.com.

They are both the same price I think. Just send them both an email to see what their workload is like. I know for mine it was about 3 day turn around AFTER he received them.

4sfed5

my GTX 330's flowed about 380cc from memory also..i wondered if the injector place wasnt doing the tests right so i had them do it again....seems to be the norm for these...

Zaphod

Doesn't that depend on the pressure you use?

Greets

deadmeat

iTrader: (2)

I think I need to go out back in the yard and pull the injectors off my 626 turbo's!

-meaty

Braineack

iTrader: (62)

yes 43.5psi, it's called standards of measurements....interesting concept.

Zaphod

Silly me... of course it should be like this.

I was confused by the discussions about how much the injectors really flow in the car (because of the fuel pressure). Sorry.

trito

iTrader: (1)

hey 4sfed5,

When I get my injectors I'll have exactly the same set up as you, RX-7 AFM, injectors, etc. If you're also using Autotune can I get a copy of your map?

Thanks,

t.t.

4sfed5

im not running auto tune and have done a bit of adjusting of the afm but if you like i can send you my maps