Custom crank trigger wheel - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to   Members

ECUs and Tuning Discuss Engine Management, Tuning, & Programming

LinkBack Thread Tools Search this Thread
Old 02-03-2010, 04:26 PM   #1
Elite Member
Thread Starter
Join Date: Jul 2005
Posts: 6,454
Total Cats: 80
Default Custom crank trigger wheel

I’m considering a custom crank trigger wheel … my first thought is an 8 tooth wheel for my AEM.

Could someone tell me the crank angle positions of the crank teeth (e.g. is it 10* and 80* BTDC, or 10* and 70*), and also the crank angle position range of the first edge and the last edges of the cam double pulse at the extremes of cam phasing?

I need to know because with the AEM, the significant edge (rising) of the cam pulse is not allowed to “cross over” any of the crank pulse rising edges. Thus the range of cam phase change limits the allowable number and location of crank teeth on a custom trigger wheel.
JasonC SBB is offline   Reply With Quote

Related Topics
Thread Thread Starter Forum Replies Last Post
Project Gemini - Turbo Civic on the Cheap Full_Tilt_Boogie Build Threads 57 07-19-2017 05:11 PM
Need help - Stock Balancer and Fastforward overlay pulleys Frank_and_Beans Supercharger Discussion 13 09-12-2016 09:17 PM
Leaky Wilwoods mx592 Suspension, Brakes, Drivetrain 1 10-01-2015 01:45 AM
Got bad Crank Angle Sensor and Random Misfire codes, but runs fine. Greasyman General Miata Chat 2 09-28-2015 11:44 AM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -4. The time now is 07:08 PM.