Idle Control settings, Confusion

Reply Subscribe

Thread Tools

Search this Thread

Oct 11, 2014 | 08:55 AM

Raggie

Thread Starter

Newb

Joined: Sep 2012

Posts: 7

Total Cats: 0

Idle Control settings, Confusion

I have a MS2 Extra by Reverent which I have had changed from v3.3.0 to v3.3.2. The Idle Control valve frequency format has changed, this is where I am getting confused. In the MS2 it has a multiplier for the valve value which on the 3.3.0 you entered a number which set the frequency. On the 3.3.2 you set it by entering the frequency in the Hz format, when I installed the base map the frequency was set at 31Hz which now I have changed to 480Hz for the Miata NB 1.8l 1998 model, am I correct in doing this?

Attached Thumbnails

Idle Control settings, Confusion-idle-control.jpg

Oct 11, 2014 | 09:01 AM

Braineack

Boost Czar

iTrader: (62)

Joined: May 2005

Posts: 80,552

Total Cats: 4,368

From: Chantilly, VA

it was always freq in Hz.

Oct 11, 2014 | 10:38 AM

Reverant

Elite Member

iTrader: (10)

Joined: Jun 2006

Posts: 6,020

Total Cats: 369

From: Athens, Greece

31Hz is the correct number for ALL Enhanced MS2s.

Nov 25, 2014 | 08:07 PM

noname4me

Junior Member

Joined: Oct 2012

Posts: 138

Total Cats: 5

Quote:

Originally Posted by Reverant

31Hz is the correct number for ALL Enhanced MS2s.

With your MS3X builds, what is the correct HZ for a NB2 engine?

BTW... I sent you a PM asking for your latest basemap for that ECU + engine combination. I purchased my MS3X from you about two years ago and would like to compare to see if you have made any changes since the map which I started with.

Thank you