7MGE Supra injector + Stock ECU?

Reply Subscribe

Thread Tools

Search this Thread

02-09-2010, 01:47 AM

Halcyon

Junior Member

Thread Starter

iTrader: (1)

Join Date: Dec 2006

Location: San Francisco, CA

Posts: 323

Total Cats: 2

7MGE Supra injector + Stock ECU?

I'm planning on rebuilding my miata slowly.
Can I install 7mge injectors and use the stock ecu during the break in period?
Going n/a for the first 1k miles or so.
Did a search and only found info regarding AFM but not MAF.
I have a 94 miata.
Not too familiar with the emanage and don't have the boomslang harness yet.

Thanks

02-09-2010, 10:54 AM

Ben

Supporting Vendor

iTrader: (33)

Join Date: Jul 2006

Location: atlanta-ish

Posts: 12,659

Total Cats: 134

They're a little large for your needs, but should be ok.

__________________

Chief of Floor Sweeping, DIYAutoTune.com & AMP EFI

Crew Chief, Car Owner & Least Valuable Driver, HongNorrthRacing

~~91 Turbo~~ | ~~10AE Turbo~~ | 01 Track Rat | #323 Mazda Champcar

Quote:

Originally Posted by concealer404

Buy an MSPNP Pro, you'll feel better.

02-09-2010, 03:01 PM

Halcyon

Junior Member

Thread Starter

iTrader: (1)

Join Date: Dec 2006

Location: San Francisco, CA

Posts: 323

Total Cats: 2

Just getting it ready so I don't have to swap them again later. Eventually, I'll have 84mm pistons and a m45 @ 8psi.

02-09-2010, 08:24 PM

messiahx

Senior Member

iTrader: (2)

Join Date: Jun 2007

Location: Shalimar, FL

Posts: 956

Total Cats: 7

The emanage will handle the size difference once you wire it in and set it up. That part is pretty straight forward. Those are 305s, right? If so, you'll be able to drive the car with them. You'll just be wasting gas under open loop conditions (like WOT). No big deal for 1K miles.