MAf question - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to Miataturbo.net   Members
 


ECUs and Tuning Discuss Engine Management, Tuning, & Programming

Reply
 
 
 
LinkBack Thread Tools Search this Thread
Old 07-28-2010, 02:38 PM   #1
Newb
Thread Starter
 
Join Date: Jul 2008
Location: Springfield mo
Posts: 38
Total Cats: 0
Default MAf question

i have a 94 miata 1.8 and i was wanting to know if a 99 miata maf will work?I have the stock pump and stock injectors in and it is still rich popping under boost.i have narrowed it down to pretty much the maf but im not for sure.
turbomclovin is offline   Reply With Quote
Old 07-28-2010, 02:50 PM   #2
Newb
Thread Starter
 
Join Date: Jul 2008
Location: Springfield mo
Posts: 38
Total Cats: 0
Default

sorry accidently posted in wrong thread
turbomclovin is offline   Reply With Quote
Old 07-28-2010, 04:09 PM   #3
Elite Member
iTrader: (10)
 
Join Date: Oct 2008
Location: Seattle, Wa
Posts: 1,780
Total Cats: 30
Default

This is a joke...right?

Details on the rest of your obviously bullshit setup. Fuel management (if any) boost level, etc.
Jeff_Ciesielski is offline   Reply With Quote
Old 07-28-2010, 05:11 PM   #4
Boost Pope
iTrader: (8)
 
Joe Perez's Avatar
 
Join Date: Sep 2005
Location: Chicago (Over two miles from Wrigley Field. Fuck the Cubs. Fuck them in their smarmy goat-hole.)
Posts: 26,317
Total Cats: 1,915
Default

If you're asking whether it will bolt-on directly, the answer is no, not even close. They're probably similar in terms of the scaling of airflow to voltage, but on the '94-'97 cars the MAF also housed the IAT sensor whereas on the NB it doesn't, so different connector.

I doubt seriously however that your MAF sensor is at fault if you're only having problems under boost. What is your actual AFR when this happens, and what are you using for fuel control?
Joe Perez is online now   Reply With Quote
Old 07-29-2010, 01:45 PM   #5
Newb
Thread Starter
 
Join Date: Jul 2008
Location: Springfield mo
Posts: 38
Total Cats: 0
Default

well my wideband is reading 10.0 and it only hittin 2lbs and sometimes i can get up to 7 but i cant go full throttle i have to feather it.My check engine light keeps coming on and off.i took out the walborro 255 and 7mgte injectors and put the stocks back in it and it still runnin rich as hell still reading 10.0.it dies at idle cause i loads up on fuel.
turbomclovin is offline   Reply With Quote
Old 07-29-2010, 01:47 PM   #6
Newb
Thread Starter
 
Join Date: Jul 2008
Location: Springfield mo
Posts: 38
Total Cats: 0
Default

i even tried the fmu and then took it off. im ordering megasquirt when i get paid this week but i still need to find out what goin on.also the weird thing to me is i have hit 10lbs on this setup before.
turbomclovin is offline   Reply With Quote
Old 07-29-2010, 01:47 PM   #7
AFM Crusader
iTrader: (18)
 
olderguy's Avatar
 
Join Date: Oct 2004
Location: Wayne, NJ
Posts: 4,438
Total Cats: 84
Default

The 255 pump may be too much for your FPR to dump enough fuel.
olderguy is offline   Reply With Quote
Old 07-29-2010, 01:51 PM   #8
Cpt. Slow
iTrader: (25)
 
curly's Avatar
 
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 12,107
Total Cats: 518
Default

WTF, you're using what for the who-now?

WHAT IS YOUR CURRENT FUEL SETUP?!?!

aka: what fuel pump, fuel pressure regulator, axillary fuel pressure regulator, injector size, and fuel pump are you running?

I believe from your half assed english I'm understanding that you're running the stock ECU including MAF, and stock ignition? What's your timing set to?

If you're running uber rich, something's uber wrong. Stop driving the car, NOW!
curly is offline   Reply With Quote
Old 07-30-2010, 10:29 AM   #9
Supporting Vendor
 
Matt Cramer's Avatar
 
Join Date: Sep 2006
Posts: 2,266
Total Cats: 51
Default

It sounds like he's also trying to run the stock ECU with Supra injectors, which normally would run way too rich. Rich enough, in fact, that I'm surprised it runs at all.
Matt Cramer is offline   Reply With Quote
Old 08-09-2010, 12:31 AM   #10
Newb
Thread Starter
 
Join Date: Jul 2008
Location: Springfield mo
Posts: 38
Total Cats: 0
Default

well i used maf cleaner with the supra injectors and the walboro 255 and it now hit 10lbs.
turbomclovin is offline   Reply With Quote
Old 08-09-2010, 12:39 AM   #11
I'm Miserable!
iTrader: (11)
 
Join Date: Apr 2008
Location: Texas, 'Murica
Posts: 2,505
Total Cats: 7
Default

Bets to when the engine hydrolocks with fuel?
chicksdigmiatas is offline   Reply With Quote
Old 08-09-2010, 01:39 AM   #12
Elite Member
iTrader: (10)
 
Join Date: Oct 2008
Location: Seattle, Wa
Posts: 1,780
Total Cats: 30
Default

Quote:
Originally Posted by chicksdigmiatas View Post
Bets to when the engine hydrolocks with fuel?
I'm just waiting for the OP to forget to breathe. It'll happen. Sub'd for posthumous partout.
Jeff_Ciesielski is offline   Reply With Quote
Old 08-09-2010, 09:03 AM   #13
Elite Member
iTrader: (2)
 
fooger03's Avatar
 
Join Date: Jan 2009
Location: Columbus, OH
Posts: 4,132
Total Cats: 187
Default

the connections on the 99MAF and the 94MAF are different. I suspect this is because they're incompatible. You have 2 options at this point - 1: get a lower volume fuel pump, 2: get an aftermarket fuel pressure regulator

If you've got a 255 and the stock '94 fuel pressure regulator, then you're trying to shove a basketball down a golf hole. **** isn't going to happen. The bad effects from this are twofold: first, your fuel system pressure is not regulated at all, fuel pressure at the rail is super high, which means that your injectors are putting substantially more fuel into the cylinders; you obviously know this already. Second, your fuel pump is working itself to death by trying to push much more fuel than your system allows. You'll see increased current load through the electrical path (fuses/relays/etc) and a shorter pump life.
fooger03 is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Raleigh: Fiberglass headlight scope, 1.6L ECU, AFM, Hardtop latches, more bigmackloud Miata parts for sale/trade 13 09-22-2017 01:34 PM
1994 Spec Miata Race Car SM/SM2/SSM For Sale Quinn Cars for sale/trade 6 10-23-2016 08:58 AM
Low oil pressure after 1.8 swap and new turbo setup JesseTheNoob DIY Turbo Discussion 15 09-30-2015 03:44 PM
NA Seat Sliders and Seat Belt Receivers skipstr Miata parts for sale/trade 2 09-28-2015 11:53 PM
Are my coils failing? viriiguy General Miata Chat 5 09-28-2015 08:39 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 09:32 AM.