megalogview help needed
#1
Junior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2009
Location: Raleigh, NC
Posts: 318
Total Cats: 0
megalogview help needed
I'm using tunerstudio and trying to record logs... I record one and save it, seems to work. Then When I try to open it with MLV, I can't get anything to show up on the graphs. I haven't paid for MLV yet, but that's mainly because it isnt working.
Sometimes I get an error that says something like "this error will be suppressed in the future" but i dunno what the error is. Also it says something about y-axis MAP not being found sometimes.
Tunerstudio seems to be working fine. Is there some way I need to set up the two programs to work together? Thanks in advance
Sometimes I get an error that says something like "this error will be suppressed in the future" but i dunno what the error is. Also it says something about y-axis MAP not being found sometimes.
Tunerstudio seems to be working fine. Is there some way I need to set up the two programs to work together? Thanks in advance
#4
Senior Member
iTrader: (4)
Join Date: Jan 2008
Location: Falls Church, VA
Posts: 1,361
Total Cats: 17
It doesn't look like it's set to display any useful traces on the graphs. You've got time, which thankfully is increasing, and rpm/sec which nobody really uses. See there on the left where it says "Graph 1" "Graph 2" etc and there are three boxes under each? Click on the top yellow one and make it rpm, make the blue one MAP, the magenta TPS, etc.
#5
Junior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2009
Location: Raleigh, NC
Posts: 318
Total Cats: 0
i dont have those choices on the side... and once it loads the time line goes flat as well (see tiny pictures, my bad) i will upload the files when i get to that computer in a , they're .csv IIRC
#6
Junior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2009
Location: Raleigh, NC
Posts: 318
Total Cats: 0
cant load a csv here's a crappy picture instead...
http://i453.photobucket.com/albums/q..._reencoded.jpg
http://i453.photobucket.com/albums/q..._reencoded.jpg
#8
Junior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2009
Location: Raleigh, NC
Posts: 318
Total Cats: 0
whoops thanks i just thought it was obvious to use the tab... time to go find tunerstudio manual. can i get an explanation of burst vs regualar data logging? Or have I worn out my noob privileges and need to search...
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM