MS3x RPM drops then raises when on gas
#1
MS3x RPM drops then raises when on gas
Good evening guys, I just got my MS3x installed in my 1.6 miata. I got the ignition timing configured so the nudge is on the 10, disconnected the TPS, and got the correct fuse disconnected. Car turns on fine and idles fine, but when I hit on the gas fast it will drop from ~800 rpms to about 400 then shoot back up normal. If I let the on the gas slowly the rpm drop is almost none.
Also sometimes I will turn the car on and it will idle at 100-400rpms until I slam the gas down, rev the car up, then let back off (assuming this process doesn't kill the car).
Any help would be greatly appreciated. I tried to include my current tune but the upload wouldn't work. I'll try again later
Also sometimes I will turn the car on and it will idle at 100-400rpms until I slam the gas down, rev the car up, then let back off (assuming this process doesn't kill the car).
Any help would be greatly appreciated. I tried to include my current tune but the upload wouldn't work. I'll try again later
#2
Turned the car on to drive home and at idle it will nit fluctuation from 200-400 rpns constantly. If I accelerate extremely slow I can not cut off but this is a challenge driving. I'm currently on the highway using voice to text and its driving without problem at high speeds. I haven't gotten any RPM drop. Any ideas?
#4
<a href=http://www.filedropper.com/ms3x><img src=http://www.filedropper.com/download_button.png width=127 height=145 border=0/></a><br /><div style=font-size:9px;font-family:Arial, Helvetica, sans-serif;width:127px;font-color:#44a854;> <a href=http://www.filedropper.com >upload files online</a></div>
I keep trying to attach the files but it doesn't work. That's the download link, hopefully it works.
I keep trying to attach the files but it doesn't work. That's the download link, hopefully it works.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM