Help! Which wire on the MAF harness is sensor ground?
04-25-2009, 04:02 PM
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2006
Location: Northern Michigan
Posts: 900
Total Cats: 0
Help! Which wire on the MAF harness is sensor ground?
I am ready to start it up with my tuner and of course I screwed up the wiring and grounded my MAP to the chasis ground at the ecu instead of sensor ground. Which wire on the 90 - 93 MAF harness is the sensor ground?
The 94+ is black with a blue stripe but I dont have a wire like that.
The 94+ is black with a blue stripe but I dont have a wire like that.
Reply
0
0
04-25-2009, 05:04 PM
#2
Senior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2006
Location: Northern Michigan
Posts: 900
Total Cats: 0
I stupidly wired the Air intake temp sensor ground to chassis ground also but it is reading the correct temperature. It just goes to show that just like parenting, anyone can do it even if they probably shouldn't...
Reply
0
0
04-26-2009, 07:55 PM
#4
Senior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2006
Location: Northern Michigan
Posts: 900
Total Cats: 0
I checked the MAF harness and found ;
2P, ?, All four ecu grounds (2C 2D 2A 2B), ?, sensor ground 2D, Chassis ground 2A, 2A
I hooked the AEM map sensor to sensor ground 2D and it reads 1.61 volts at "0" psi, no vacuum, which is what it should be.
Yeah. For now.
2P, ?, All four ecu grounds (2C 2D 2A 2B), ?, sensor ground 2D, Chassis ground 2A, 2A
I hooked the AEM map sensor to sensor ground 2D and it reads 1.61 volts at "0" psi, no vacuum, which is what it should be.
Yeah. For now.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
