Bond

iTrader: (6)

Hey noob, you got quality help in this thread, you should buy my turbo ****. I loved it for a street setup.

https://www.miataturbo.net/showthrea...t=greddy+ms+h4

1slowna

iTrader: (1)

I guess those dyno danamics read a bit lower then a dynojet? My bone stock 1.6 with an rx7 maf made 97whp and after a set of hks 256 cams it made 114.9. The 1.8 thats in my car now is significantly more powerful then that, i went from running a 10.1 in the 8th mile to a 9.70 without making any other changes.
Back to OPs question. My opinion is as follows, buy a MSpnp or a DIY pnp thats already assembled and learn to tune, then buy a greddy kit and have fun with it, add an intercooler and you can potentially break 200whp.

hustler

iTrader: (6)

...or the 2nd if you know where you're going.

ARTech is the guy to talk to if you want to stick with the 1.6.

MXmine

lol that would be the last thing i do. i built that from scraps. but i do have other motors. will the carb get in the way of anything or does that not even matter. cuz everything i read is about ls1 fuel injected motors i havent really seen one with a 350 out of a old school chevy

flier129

iTrader: (7)

What if the OP didn't want to mess with VVT and decided to go with a 99-00 head on an 01+ block? Will not having VVT take away that much fun-factor power under the curve?

hustler

iTrader: (6)

It depends if you've been to the 10lb/1hp side or not. You cannot unsee the awesome.