China 64mm TB knock-off
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jun 2010
Location: Niagara Falls NY/ Ontario, CA
Posts: 163
Total Cats: 8
China 64mm TB knock-off
I was trolling around and came across this. Very similar but likely not the same qualit. Still though, has anyone tried or even seen this?
https://www.aliexpress.com/item/PQY-...f-c460ef89c255
https://www.aliexpress.com/item/PQY-...f-c460ef89c255
#10
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jun 2010
Location: Niagara Falls NY/ Ontario, CA
Posts: 163
Total Cats: 8
Probably just changed the CNC code a touch and few different bolts n bearings. Likely see these popping onto cars soon.
#12
lol "changing things" is way too much effort for these places. the only things they actually "modify" are leaving off the previous companies logos and emblems.
or maybe it's not even that. maybe junk2 slaps their emblem on when these things arrive stateside, so in china these "knockoffs" are the actual part without even anything left off.
or maybe it's not even that. maybe junk2 slaps their emblem on when these things arrive stateside, so in china these "knockoffs" are the actual part without even anything left off.
#14
I'll wait until someone can compare it up close to the Junk2 TB. It would be tragic if I bought the cheap knockoff to prevent catastrophic engine failure and then the knockoff failed..
The Junk2 suddenly becomes appealing in the <$100 market. I find it mind boggling to buy a $250-300 TB and then have to dick with it to make it work properly; it's much more palatable for $80.
The Junk2 suddenly becomes appealing in the <$100 market. I find it mind boggling to buy a $250-300 TB and then have to dick with it to make it work properly; it's much more palatable for $80.
#16
Just to clarify, what is the total set of fixes for a skunk 2 TB. I will upgrade to one of these over my epoxied stocker.
From what I have read and searched, the fixes for the skunk2 TB are redrilling the spring engagement hole so the throttle doesn't stick, and I read something about loctite, and some longer allen heads, but I didn't see it in once collective place, just spattered between build threads and whatnot.
From what I have read and searched, the fixes for the skunk2 TB are redrilling the spring engagement hole so the throttle doesn't stick, and I read something about loctite, and some longer allen heads, but I didn't see it in once collective place, just spattered between build threads and whatnot.
#17
Supporting Vendor
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,956
Total Cats: 1,008
Hmm. I didn't do anything to my junk2 aside from get slightly longer bolts, but sometimes it idles high. maybe I need to do that spring mod.
I hate overpaying for stuff. shoulda bought the knockoff haha
I hate overpaying for stuff. shoulda bought the knockoff haha
#18
Minimum order quantity is 10 on aliexpress, buy a bunch and throw on a "Junk2" sticker on it and undercut OBX pricing.
OBX Billet Throttle Body Mazda Miata 99-05 1.8L 64mm BP-4W, BPT, BP-Z3 All | eBay
I only listed OBX since they're shipping from the states.
OBX Billet Throttle Body Mazda Miata 99-05 1.8L 64mm BP-4W, BPT, BP-Z3 All | eBay
I only listed OBX since they're shipping from the states.
Last edited by .one lane; 09-22-2017 at 04:10 PM.
#19
Minimum order quantity is 10 on aliexpress, buy a bunch and throw on a "Junk2" sticker on it and undercut OBX pricing.
OBX Billet Throttle Body Mazda Miata 99-05 1.8L 64mm BP-4W, BPT, BP-Z3 All eBay
I only listed OBX since they're shipping from the states.
OBX Billet Throttle Body Mazda Miata 99-05 1.8L 64mm BP-4W, BPT, BP-Z3 All eBay
I only listed OBX since they're shipping from the states.