Lean!!!!!what injectors should i use???
#4
you could take the cheaper route and just do a band-aid setup with a RRFPR from BEGi or Vortech and some sort of boost timing control, or just take the best bang for your buck and shill out the money for either a Megasquirt DIYPNP offered on this site in the sale threads, or a complete plug n' play MSPNP from diyautotune.com
$600+ 100 or so bucks for a wideband sensor to replace the stock sensor is well worth it than blowing up your motor
$600+ 100 or so bucks for a wideband sensor to replace the stock sensor is well worth it than blowing up your motor
#10
Senior Member
iTrader: (14)
Join Date: Aug 2008
Location: Tinley Park, IL
Posts: 1,482
Total Cats: 0
1. Stop boosting your motor lean right now before you blow it up!
2. Walk before you run. Read this https://www.miataturbo.net/diy-turbo-discussion-14/diy-faq-all-your-answers-one-big-post-4288/ for the basics.
3. Come back with more knowledge and a less vague description of your setup and ask questions.
4. Catch Hell for not doing # 2. or posting a meet and greet thread with a description.
5. Fix your issue, enjoy boosted Miata and live the dream.
2. Walk before you run. Read this https://www.miataturbo.net/diy-turbo-discussion-14/diy-faq-all-your-answers-one-big-post-4288/ for the basics.
3. Come back with more knowledge and a less vague description of your setup and ask questions.
4. Catch Hell for not doing # 2. or posting a meet and greet thread with a description.
5. Fix your issue, enjoy boosted Miata and live the dream.
#11
Yes, less info is more. I really want to help you. All your turd bucket stock ecu will handle is 305 injectors. Get a megasquirt. Standalones are so cheap for our cars you have no excuse. After this, stock 1.8 injectors will do 7-8 psi. After you are done failing on stock 1.8 injectors, atleast get some 460's. Now you can run 12-15 psi and not fail so much. lf you really want to be a baller get some 1000's and run e85, I doubt you are that awesome though.