Should I: Gut my 00' intake?
03-19-2013, 08:10 PM
#44
I really have no idea about the intake but I will give you my ignorant opinion since you can't seem to get anyone else too.....
Best I can tell that is a stock B18 intake which will work, and prolly be an inprovement over the Mazda IM. IF you read the Honda intake post you will see people are using a Blox or Skunks2 IM which really looks nothing like the one you can get for free.....
SKUNK2 Intake Manifold 68mm Blox Tuner Throttle Body B18C1 94 01 Integra GSR | eBay is the SKunks
Blox Intake Manifold Acura Integra Type R B18C5 DOHC vtec Bxim 20100 | eBay Blox
94 01 Acura Integra B20 B18A B Big 70mm Air Intake Manifold Cast Aluminum JDM | eBay what I bought....
If I were you I would, actually I did, Buy the cheap IM for the B18 and weld the flange from the NB IM to it JUST LIKE EVERYONE ELSE IN THE HONDA INTAKE MANIFOLD THREAD DID........seems to be a good idea to me?
Best I can tell that is a stock B18 intake which will work, and prolly be an inprovement over the Mazda IM. IF you read the Honda intake post you will see people are using a Blox or Skunks2 IM which really looks nothing like the one you can get for free.....
SKUNK2 Intake Manifold 68mm Blox Tuner Throttle Body B18C1 94 01 Integra GSR | eBay is the SKunks
Blox Intake Manifold Acura Integra Type R B18C5 DOHC vtec Bxim 20100 | eBay Blox
94 01 Acura Integra B20 B18A B Big 70mm Air Intake Manifold Cast Aluminum JDM | eBay what I bought....
If I were you I would, actually I did, Buy the cheap IM for the B18 and weld the flange from the NB IM to it JUST LIKE EVERYONE ELSE IN THE HONDA INTAKE MANIFOLD THREAD DID........seems to be a good idea to me?
Reply
0
0
03-25-2013, 04:28 AM
#48
With zero visual cross-referrencing on my part, I think the Honda manifold you have is a 1994-2001 B18B1 intake (140 hp Integra LS non-VTEC).
It would be a slight improvement over the 99-00 Miata I.M., but not worth the work IMHO.
Like 18psi said, source a ~$100 Skunk2/BLOX/AEBS/OEM ITR etc B-Series Honda intake and splice your 99-00 manifold for great success.
It would be a slight improvement over the 99-00 Miata I.M., but not worth the work IMHO.
Like 18psi said, source a ~$100 Skunk2/BLOX/AEBS/OEM ITR etc B-Series Honda intake and splice your 99-00 manifold for great success.
Reply
0
0
03-25-2013, 06:56 PM
#49
Senior Member
Thread Starter
iTrader: (8)
Join Date: May 2011
Location: Granbury, Tx
Posts: 813
Total Cats: 14
With zero visual cross-referrencing on my part, I think the Honda manifold you have is a 1994-2001 B18B1 intake (140 hp Integra LS non-VTEC).
It would be a slight improvement over the 99-00 Miata I.M., but not worth the work IMHO.
Like 18psi said, source a ~$100 Skunk2/BLOX/AEBS/OEM ITR etc B-Series Honda intake and splice your 99-00 manifold for great success.
It would be a slight improvement over the 99-00 Miata I.M., but not worth the work IMHO.
Like 18psi said, source a ~$100 Skunk2/BLOX/AEBS/OEM ITR etc B-Series Honda intake and splice your 99-00 manifold for great success.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM
