Steam from turbo
#1
Junior Member
Thread Starter
Join Date: May 2013
Location: In a van by the river
Posts: 49
Total Cats: -31
Steam from turbo
I've got a 1990 NA, 1.6 with a mega squirt turbo. It's my daughter's car. She calls me on the phone and says when she got home she noticed steam coming from under the hood. She opens it and says sees it's coming from the turbo.
I changed the oil a couple weeks ago and noticed nothing wrong with the oil. Last week I noticed it was running hot when I took it for a drive. The radiator was about three quarts low so I filled it with some 50/50. Now, four days later, it's steaming.
Could this be a blown head gasket leaking into the exhaust? Hopefully something simpler?
I changed the oil a couple weeks ago and noticed nothing wrong with the oil. Last week I noticed it was running hot when I took it for a drive. The radiator was about three quarts low so I filled it with some 50/50. Now, four days later, it's steaming.
Could this be a blown head gasket leaking into the exhaust? Hopefully something simpler?
#4
Elite Member
iTrader: (13)
Join Date: Dec 2006
Location: Taos, New mexico
Posts: 6,612
Total Cats: 567
I'd check that first personally. Not sure if it's possible but maybe water is pushing passed the CHRA and burning up in the engine bay. I've had oil push do this before until I added a restrictor.
#7
Junior Member
Thread Starter
Join Date: May 2013
Location: In a van by the river
Posts: 49
Total Cats: -31
I'm hoping it's also just a leaking hose or something that simple, but I know next to nothing about turbo chargers other than the principle behind how they work. Again, I just wanted to get an idea from others as a heads up. For instance, I did not know the inter-cooler was independent of the engine's cooling system.
#8
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,080
there will be two water lines on the turbo, horizontal to the ground. They should be simply plumbed from the from water neck, through the turbo, and then out to the water pump inlet. Chances are one of the water lines on the turbo is leaking coolant slightly and is the source of the steam. You'll want to find out quickly, as this water IS dependent of the engine's cooling system.
#9
Junior Member
Thread Starter
Join Date: May 2013
Location: In a van by the river
Posts: 49
Total Cats: -31
there will be two water lines on the turbo, horizontal to the ground. They should be simply plumbed from the from water neck, through the turbo, and then out to the water pump inlet. Chances are one of the water lines on the turbo is leaking coolant slightly and is the source of the steam. You'll want to find out quickly, as this water IS dependent of the engine's cooling system.
#12
Junior Member
Thread Starter
Join Date: May 2013
Location: In a van by the river
Posts: 49
Total Cats: -31
Okay, thanks for the help. The clamp for one of the lines was very loose. I tightened it and added the proper amount of coolant to the overflow bottle. Radiator was still full.
Thanks again for the pointers.
Thanks again for the pointers.
#13
As long as you have rubber lines and clamps, you'll always run the risk of coolant leaks in that area. I know every so often I have to take the ends of the water lines, trim them off and re-install them because of the heat in the area causing them to eventually leak. I need to spend the $$$ on some hard lines :(
#15
Junior Member
Thread Starter
Join Date: May 2013
Location: In a van by the river
Posts: 49
Total Cats: -31
I have to applaud a 16 yr old girl for having the sense to look under the hood so she could show me exactly where the steam was coming from while it was still steaming.
#16
It was running hot because it was low on coolant. I filled the radiator and over flow bottle and the temp gauge never hasn't gone above half way since. This leaking hose/clamp explains where the coolant went.
I have to applaud a 16 yr old girl for having the sense to look under the hood so she could show me exactly where the steam was coming from while it was still steaming.
I have to applaud a 16 yr old girl for having the sense to look under the hood so she could show me exactly where the steam was coming from while it was still steaming.
#20
Junior Member
Thread Starter
Join Date: May 2013
Location: In a van by the river
Posts: 49
Total Cats: -31
Lots of pics of it on this site but here's one just for you.
I've turned more wrenches than most people period. But I've never had a turbo charged car. One thing that surprises me though is a turbo in a standard. Much harder to build up boost. I've got a lot of grand national buddies and they mention that a lot.
But at any rate, it's a nice car. It only has 25k original miles on it and it's a 1990. A doctor had it and died a while back. He took it to the track a few times a year and that was pretty much it. His wife held on to it for quite a while and finally put it up for sale and my daughter found it on the interwebs. It came with the software and all to tune it but I haven't messed with it really at all. It runs just fine and she's not going to be taking it to the track so unless it starts running rough I'll leave well enough alone on it.
I've turned more wrenches than most people period. But I've never had a turbo charged car. One thing that surprises me though is a turbo in a standard. Much harder to build up boost. I've got a lot of grand national buddies and they mention that a lot.
But at any rate, it's a nice car. It only has 25k original miles on it and it's a 1990. A doctor had it and died a while back. He took it to the track a few times a year and that was pretty much it. His wife held on to it for quite a while and finally put it up for sale and my daughter found it on the interwebs. It came with the software and all to tune it but I haven't messed with it really at all. It runs just fine and she's not going to be taking it to the track so unless it starts running rough I'll leave well enough alone on it.