When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have not checked the dyno yet, but I believe this may contribute 10-40 rwhp. Has anyone done dyno tests on color of valve covers? It would be nice to see if red hits my expected power expectations.
But seriously, this was easier than I expected. VHT SP204 Wrinkle Plus Coating Red. I used high-heat caliper paint for the lettering.
I used silver for the lettering after with a ink toner syringe. If I did it again I would have done the lettering first and then used a liquid mask. As you can see the silver is also wrinkle and not as clean as I wanted.
Shrug. It'll pass.
Not bad! Wrinkle paint can be a fickle, salty bitch, since it's cure is heavily dependent on the environment to achieve texture. Using a heat gun on the wrinkle paint was key. It gave me control to monitor the wrinkle progress and offgassing - way more even and textured. I was pretty amazed.
11-19-2021, 08:06 PM
Valve Cover Painting
0
