Valve spring drought
#42
Just got off the phone with Jegs and apparently TONIGHT they're getting a shipment of 50-100 springs. I'm 6th on the waiting list so if its 100 there would be JUST enough for my order .. if not I have to wait until the next shipment.
So apparently these are available .. just order yours 3-6 months in advance of when you think you will need them ?
So apparently these are available .. just order yours 3-6 months in advance of when you think you will need them ?
#46
Sorry for the delay.
The spring suggested to me from BC is the BC1600. I was told that it would have approx. 65 lbs on the seat or if you want more pressure you can shim the spring to 1.450 “ for 73 LBS or a 1.400” 85 lbs. This was going off of the measurements that I had taken of the stock VVT head with a caliper along with a little basic math.
What do you guys think about this possible solution?
BrianCrower.com | RunBC.com // Subaru / EJ257
https://store.briancrower.com/produc...13489426169921
The spring suggested to me from BC is the BC1600. I was told that it would have approx. 65 lbs on the seat or if you want more pressure you can shim the spring to 1.450 “ for 73 LBS or a 1.400” 85 lbs. This was going off of the measurements that I had taken of the stock VVT head with a caliper along with a little basic math.
What do you guys think about this possible solution?
BrianCrower.com | RunBC.com // Subaru / EJ257
https://store.briancrower.com/produc...13489426169921
#48
That is what my researching is based off of - Stock head, Stock Valves, Stock Retainers, Stock Keepers, but Aftermarket Beefed Up Valve Springs. I am not sure the metallurgical tollerances here etc haha, but based on the data I took from the VVT head I have (Japanese Domestic Market version w/ flat top, not US) this was the closest to the stock intake spring which looked to be the bigger spring of the two based on it's larger coil diameter. My numbers are all in this thread only a few posts above so please double check on yours to be certain.
OD/ID on this BC1600 spring is 1.050"/.755". Stock is 1.032"/.725". Is this within tolerance? Seems damn close. Also, you think the 65lbs is enough and I can stop my search for shims? GT28R power coming is all, nothing crazy.
The only thing I'm having a tough time with is finding shims. I don't know if I'm being too picky with the size differences or not, as in, how off is too off vs it can be this much off and be fine.
OD/ID on this BC1600 spring is 1.050"/.755". Stock is 1.032"/.725". Is this within tolerance? Seems damn close. Also, you think the 65lbs is enough and I can stop my search for shims? GT28R power coming is all, nothing crazy.
The only thing I'm having a tough time with is finding shims. I don't know if I'm being too picky with the size differences or not, as in, how off is too off vs it can be this much off and be fine.
#51
Thanks for the research and numbers; this is definitely interesting. Link to related (sticky) thread for comparison reasons hereafter:
https://www.miataturbo.net/engine-pe...ng-info-70450/
The BC spring rate is 240lb/in; need to check the OEM VVT rates. Dimension-wise, they seem like they will work just fine.
https://www.miataturbo.net/engine-pe...ng-info-70450/
The BC spring rate is 240lb/in; need to check the OEM VVT rates. Dimension-wise, they seem like they will work just fine.
Last edited by HarryB; 04-24-2019 at 08:21 AM.
#53
In stock. just talked to them. actually have an invoice ready.
5.50$ each. = 88$ a set.
8$ shipping.
Valve spring B18/B20/B30E/F
email John@vp-autoparts.com
phone 8437600170
stateside address. 3225 Fortune Drive STE #B North Charleston SC 29418
Order yourself some. and Cat me up.
have a great day.
5.50$ each. = 88$ a set.
8$ shipping.
Valve spring B18/B20/B30E/F
email John@vp-autoparts.com
phone 8437600170
stateside address. 3225 Fortune Drive STE #B North Charleston SC 29418
Order yourself some. and Cat me up.
have a great day.
#54
I ordered a set of these yesterday (their website does not allow you to pay online) and got an email this morning with a phone number to call
my visa number into. The two people I spoke to, both had proper Swedish accents and confirmed this will be going out Monday. My shipping was $10.95, however
if you order the valves in sets of 8 (418737-SET), the costing comes in at $37.50/set.
Thanks JR Master!
my visa number into. The two people I spoke to, both had proper Swedish accents and confirmed this will be going out Monday. My shipping was $10.95, however
if you order the valves in sets of 8 (418737-SET), the costing comes in at $37.50/set.
Thanks JR Master!
#58
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,177
Total Cats: 1,681
In stock. just talked to them. actually have an invoice ready.
5.50$ each. = 88$ a set.
8$ shipping.
Valve spring B18/B20/B30E/F
email John@vp-autoparts.com
phone 8437600170
stateside address. 3225 Fortune Drive STE #B North Charleston SC 29418
Order yourself some. and Cat me up.
have a great day.
5.50$ each. = 88$ a set.
8$ shipping.
Valve spring B18/B20/B30E/F
email John@vp-autoparts.com
phone 8437600170
stateside address. 3225 Fortune Drive STE #B North Charleston SC 29418
Order yourself some. and Cat me up.
have a great day.
#59
Ok my order of springs from VP Volvo parts just came in and I thought I'd give a little update if anyone else was trying to get some springs. Ended up paying like $93 or something shipped to my door. Really nice people there.
The dimensions appear to be perfect and the factory top retainer fits well into the ID of the springs. My head is at the shop so I can't test actual fitment, but I took measurements and everything looks good.
Volvo Miata valve spring dimensions
The dimensions appear to be perfect and the factory top retainer fits well into the ID of the springs. My head is at the shop so I can't test actual fitment, but I took measurements and everything looks good.
Volvo Miata valve spring dimensions