Wait or Go for It!!
#1
Wait or Go for It!!
So my engine is rebuilt and sorted for the most part. I have 85 miles on the motor as of now. I've got my wastegate wired open and am dying to throw some boost at it. To soon?... I've got the basics tuned. AFR's look good and safe. No leaks and seems to be running just fine. I've changed the oil twice already and no evidence of anything out of place or shinny bits floating around. Do you all think I should wait to start adding boost even if just wastegate pressure? Your opinions are appreciated.
#6
I would just run a line straight to the wastegate and run it at WG pressure.
You said nothing shiny. Did you shine a flashlight into the oil from the first change? It is normal to have some super fine glitter from the rings breaking in, you should have seen the oil that came out of my new John Dere after 1 hour of running!
You said nothing shiny. Did you shine a flashlight into the oil from the first change? It is normal to have some super fine glitter from the rings breaking in, you should have seen the oil that came out of my new John Dere after 1 hour of running!