Miata Turbo Forum - Boost cars, acquire cats.
Put back together. It looks ok but not 100% happpy with it. Mounted the sterio and hooked up the lc-1 and boost controller. There is a serious amount of wiring behind here
Put back together. It looks ok but not 100% happpy with it. Mounted the sterio and hooked up the lc-1 and boost controller. There is a serious amount of wiring behind here
0 2015/09/20 02:17:52
Wrapped the top bolster on the right. Left is factory.
Wrapped the top bolster on the right. Left is factory.
0 2015/09/20 02:18:02
Made a panel for the gauges in MDF and vinyl on top.
Made a panel for the gauges in MDF and vinyl on top.
0 2015/09/20 02:18:10
0 2015/09/28 22:49:49
It was really well built. Needed more turbo
It was really well built. Needed more turbo
0 2015/10/23 17:23:45
And the petrol car you could build for that price....
And the petrol car you could build for that price....
0 2015/10/23 17:23:54
Gauges and control panel all mounted for the last time....needs more stainless things IMO will get the car going first
Gauges and control panel all mounted for the last time....needs more stainless things IMO will get the car going first
0 2015/10/23 17:27:23
Autoclutch Custom built this clutch setup for my car very happy with their business so far hoping it will hold up well. Its a carbon kevlar faced clutch plate with a modified cover plate for more clamping force
Autoclutch Custom built this clutch setup for my car very happy with their business so far hoping it will hold up well. Its a carbon kevlar faced clutch plate with a modified cover plate for more clamping force
0 2015/10/23 17:27:32
Installed in the car note my random green clutch line
Installed in the car note my random green clutch line
0 2015/10/23 17:27:38
Got a tidy new gearbox from my parts guy will get that in this weekend too hopefully.
Got a tidy new gearbox from my parts guy will get that in this weekend too hopefully.
0 2015/10/23 17:27:51
Pulled the IM again to keep m2cupcar haapy Going to solid mount my opg and run a flexible hose to the block.
Pulled the IM again to keep m2cupcar haapy Going to solid mount my opg and run a flexible hose to the block.
0 2015/10/25 22:26:24
Yay
Yay
0 2015/10/25 22:26:33
0 2015/10/25 22:26:44
1980 Mazda B1600 with a BP coversion and front and rear suspension :) its a miata ute basically
1980 Mazda B1600 with a BP coversion and front and rear suspension :) its a miata ute basically
0 2015/10/27 21:52:12
Have since sold the flat deck and got a proper tray
Have since sold the flat deck and got a proper tray
0 2015/10/27 21:52:20
0 2015/10/27 21:52:31
Hotside IC piping is done need to mount the bottom of the intercooler forward to gain clearance will use some aluminum to do this
Hotside IC piping is done need to mount the bottom of the intercooler forward to gain clearance will use some aluminum to do this
0 2015/11/02 01:29:37
Put a flexible hose between the block and the tee. I Imagine this should be loads better with vibration going to use some sort of P clamp to mount the OP sender to the frame rail should be tidy enough.
Put a flexible hose between the block and the tee. I Imagine this should be loads better with vibration going to use some sort of P clamp to mount the OP sender to the frame rail should be tidy enough.
0 2015/11/02 01:29:43
Need to replace this bushing its absolutely fubared
Need to replace this bushing its absolutely fubared
0 2015/11/02 01:30:06
Hotside all sorted. Need to pull the Inter cooler forward at the bottom to gain some clearance between the water hose
Hotside all sorted. Need to pull the Inter cooler forward at the bottom to gain some clearance between the water hose
0 2015/11/02 01:37:49
Changed the OP sender and oil feed setup this shouldn't snap off now. Will mount the sender to the frame rail with some sort of P clamp or similar
Changed the OP sender and oil feed setup this shouldn't snap off now. Will mount the sender to the frame rail with some sort of P clamp or similar
0 2015/11/02 01:37:55
Need to replace this bushing it is absolutely fubared
Need to replace this bushing it is absolutely fubared
0 2015/11/02 01:38:17
Needed a little bit more clearance from the rail.
Needed a little bit more clearance from the rail.
0 2015/11/04 01:04:53
Downpipe under way.
Downpipe under way.
0 2015/11/04 01:05:02
Stoked with the speaker panels :)
Stoked with the speaker panels :)
0 2015/11/04 01:05:06
Package turned up from carbon miata
Package turned up from carbon miata
0 2015/11/04 01:05:16
0 2015/11/06 01:22:57
0 2015/11/06 01:26:04
Found this and had a good laugh
Found this and had a good laugh
0 2015/11/16 01:16:30
-6 waterlines done apart from heat wrapping
-6 waterlines done apart from heat wrapping
0 2015/11/16 01:16:40
Rerouted my oil feed line and OPS
Rerouted my oil feed line and OPS
0 2015/11/16 01:16:45
The blue and red really annoys my inner ocd
The blue and red really annoys my inner ocd
0 2015/11/16 01:16:53
Cold side all routed. need to clock it a little further, so its not on the frame rail
Cold side all routed. need to clock it a little further, so its not on the frame rail
0 2015/11/16 01:17:01
Waterlines
Waterlines
0 2015/12/12 22:39:25
0 2015/12/12 22:39:38
Cold-side finished polished and BOV
Cold-side finished polished and BOV
0 2015/12/12 22:39:50
Mounted coldside
Mounted coldside
0 2015/12/12 22:40:00
Isn't actually much clearance between the radiator and the sway bar.
Isn't actually much clearance between the radiator and the sway bar.
0 2015/12/12 22:40:07
Starting to look line an engine bay
Starting to look line an engine bay
0 2015/12/12 22:40:17
Horrible glare photo
Horrible glare photo
0 2015/12/12 22:40:23