Miata Turbo Forum - Boost cars, acquire cats.
3-Pull
3-Pull
0 2017/09/30 12:06:27
3-Stab
3-Stab
0 2017/09/30 12:06:26
4-Pull
4-Pull
0 2017/09/30 12:06:26
4-Stab
4-Stab
0 2017/09/30 12:06:25
5-Pull
5-Pull
0 2017/09/30 12:06:24
5-Stab
5-Stab
0 2017/09/30 12:06:22
6-Pull
6-Pull
0 2017/09/30 12:06:21
6-Stab
6-Stab
0 2017/09/30 12:06:20
0 2017/09/24 14:05:51
0 2017/09/15 16:23:32
0 2017/09/12 08:47:41
0 2017/09/07 18:53:20
Insufficient Integral to pull PV (boost) back to SP (Target)
Insufficient Integral to pull PV (boost) back to SP (Target)
0 2017/09/01 21:58:15
20 kPa oscillation with huge swings in duty cycle
20 kPa oscillation with huge swings in duty cycle
0 2017/09/01 21:55:24
And last, A long pull. you can see the Boost Duty moving to try to keep SP and PV (Target and kPa) together. To me, that is what we are after.
And last, A long pull. you can see the Boost Duty moving to try to keep SP and PV (Target and kPa) together. To me, that is what we are after.
0 2017/09/01 04:15:21
A 1st and 2nd run-up at 75%, D=20
A 1st and 2nd run-up at 75%, D=20
0 2017/09/01 04:12:08
75%, D=20, throttle play. Note target and MAP track pretty well.
75%, D=20, throttle play. Note target and MAP track pretty well.
0 2017/09/01 04:12:07
65%, D=10, 2nd gear run. No overshoot.
65%, D=10, 2nd gear run. No overshoot.
0 2017/09/01 04:12:05
4K punch at 75% and D=20, starting at 100 kPa
4K punch at 75% and D=20, starting at 100 kPa
0 2017/09/01 04:08:18
4K punch at 75% and D=20, starting at low kPa
4K punch at 75% and D=20, starting at low kPa
0 2017/09/01 04:08:17
4K punch at 75% and D=10
4K punch at 75% and D=10
0 2017/09/01 04:08:16
4K punch at 65% and D=10
4K punch at 65% and D=10
0 2017/09/01 04:08:15
Targets
Targets
0 2017/09/01 04:04:32
Bias Settings
Bias Settings
0 2017/09/01 04:04:31
General Settings
General Settings
0 2017/09/01 04:04:30
0 2017/07/28 18:09:52
With 6UL's.
With 6UL's.
0 2017/07/26 05:03:40
Relief cuts in Exhaust Manifold
Relief cuts in Exhaust Manifold
0 2017/07/26 05:03:35
O/C above I/C
O/C above I/C
0 2017/07/26 05:03:32
D2S Morimoto kit
D2S Morimoto kit
0 2017/07/26 05:03:29
IM support opened for filter after adapter plate for oil cooler.
IM support opened for filter after adapter plate for oil cooler.
0 2017/07/26 05:03:26
Shows ballast mounted to sheetmetal with (3) self-drilling screws, as well as the relay. Other side is similar.
Shows ballast mounted to sheetmetal with (3) self-drilling screws, as well as the relay. Other side is similar.
0 2017/07/26 04:38:41
With HID's in, lenses polished and covered with Lamin-X film. Interested to see how the film performs.
With HID's in, lenses polished and covered with Lamin-X film. Interested to see how the film performs.
0 2017/07/26 04:38:35
O/C above I/C
O/C above I/C
0 2017/07/24 10:06:04
Pic of ducting going below I/C, and the P/S cooler in part of that space.
Pic of ducting going below I/C, and the P/S cooler in part of that space.
0 2017/07/24 10:06:01
Another view
Another view
0 2017/07/24 10:05:58
Relief in Support
Relief in Support
0 2017/07/24 10:05:56
0 2017/07/09 05:37:40
0 2017/07/09 05:32:37
0 2017/07/09 05:32:36