bouncy AFR from LC1 on NB gauge
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Sep 2006
Location: Hong Kong
Posts: 523
Total Cats: 0
bouncy AFR from LC1 on NB gauge
HI,
After upgrading to 305cc injectors and RX7 AFM... my NB gauge LED reading has been hovering with 4-5 LED at WOT. I am using an Autometer NB guage with 20LED.
At WOT, all 4-5 LED would hover aorund 12-13.5 AFR, so the question is what is the AFR I should be making note of?
Thanks,
After upgrading to 305cc injectors and RX7 AFM... my NB gauge LED reading has been hovering with 4-5 LED at WOT. I am using an Autometer NB guage with 20LED.
At WOT, all 4-5 LED would hover aorund 12-13.5 AFR, so the question is what is the AFR I should be making note of?
Thanks,
#2
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,080
turn the idle mixture screw back maybe 1 full turn until you see around 14.7-15.0
you have to drill a small cap out....looks like the idle speed screw on the TB.
did you also adjust the clockspring so it was 5-8 clicks softer?
you have to drill a small cap out....looks like the idle speed screw on the TB.
did you also adjust the clockspring so it was 5-8 clicks softer?
#3
Senior Member
Thread Starter
iTrader: (1)
Join Date: Sep 2006
Location: Hong Kong
Posts: 523
Total Cats: 0
Yes.. the RX7 AFM was adjusted for good idle. The NB gauge shows perfect AFR while idle and cruise, just when I get into boost with heavy thottle, it will show 4-5 LED instead of just 1 LED light.
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM