Dow.tom

iTrader: (3)

i have a little bump from the bondo on the bottom right side, i plan to sand it down more there and smoothen it out. Than it gets blasted with CLASSIC RED than i will stop getting looks from all the ricers thinkign im one of them.

magnamx-5

iTrader: (7)

thatl buff out

Dow.tom

iTrader: (3)

updated, put in my boost and WB gauge... any tips for routing the boost vac line through firewall? I couldnt get it through the grommet on the driver side (1.8) Should i run it to passenger side and through firewall? Will that cause too much "lag"


http://s93.photobucket.com/albums/l52/dow-tom/My%20Mx5/

SloS13

iTrader: (1)

with that thin nylon line I doubt extra length would be a problem. *cough*. I havent received any complaints on mine. LOLZ I ran mine through the firewall near the evaporator. Was kind of a pain but it works fine.

Dow.tom

iTrader: (3)

so running it from the driver side to the passenger side through the firewall, and T off the manifold is fine?

magnamx-5

iTrader: (7)

mine works fine like that. so long as there are no leaks i doubt you will have any problems lag will be insignificant at sub 10 ft lengths.

Dow.tom

iTrader: (3)

okay i'll do that, now i wanna find a good source to tap, i have CC but i dont use it, should i just tee it?

hustler

iTrader: (6)

That looks really good.

Dow.tom

iTrader: (3)

thanks, the door panels are leather to match. bought it like that.