Pitlab77

iTrader: (3)

I dont have the rubber cap that came on the nipple where you attach the oil return line. Anyone have any idea of a part number or something from mazda. Tried calling a dealr today and the guy was like. I dont know what you are talking about. I dotn see it on my diagram.

O'reillys had nothing that size. Only NAPA is pretty far from my house. I need it like tomorrow if possible. Please Any ideas

olderguy

iTrader: (19)

B660-10-328 Cover, Blind-cyl. Block

Pop VII

If needing a roadside repair suggest a short 3-4 inches of 5/8 or 3/4" hose. Screw in a fat short bolt of screw in one end and secure it with a hose clamp. There is your cap. Clamp it in place.

Pitlab77

iTrader: (3)

wow

Philip

I would have done a variation on pop's suggestion, leave the hose attached in the hard to reach spot, but trim it about 3" longer than the nipple, fold over, clamp, done.
if it's not too brittle anyway.

drftem

so there should be no negative affects to the drain cover not being exactly air tight like the oem one? if not im just gunna do that and put a bolt in the end of it.

Loki047

iTrader: (6)

Fixed an F-body fuel rail that way..little scared when it pressurized.

Braineack

iTrader: (62)

shouldn't even have any oil pressure on the hose.

Pitlab77

iTrader: (3)

way to bring back a dead thread

Sparetire

Necro-post just for the hell of it. HA!!!!1!!!2....1

Bryce

iTrader: (24)

FUUUUUUUUCK YOUUUUUUUUUU!


At first I thought that, for some reason, Stan had picked up another turbo car. :(