As stated I pulled my plugs out and took a close look. I compared them to the NGK page. The plugs are Bkr7e VX. I'm replacing with Bkr7e. My #2 plug came out with my hands, so that explains the slight miss I've had.

#1: Light gray tip, looks fine
#2: Brown tip, because it was loose, otherwise fine
#3: Dark gray tip, looks fine
#4: Dark gray tip, looks fine

What I noticed is the darker color of 3 and 4. Does this mean they are hotter? I wonder because of the coolant re route. I'm just wondering if this is a sign that I should do the reroute or if this is all normal.

 

hotter would be more white.

 

So that means #1 was hotter than the rest. Should I not worry about it? It isn't a huge difference, just something I noticed right away.

 

Take a couple of pics, save them as bitmaps, upload to a hosting site, and linkey to here.

 

Well here they are. As previously stated #2 was not in all the way, hence the oil all over it. The pictures don't show the miscoloring quite as well as I had hoped. I suppose the fact that you can't see the difference here is a good enough sign they are ok.

Overview


The tips


I took a peek at the pistons while the plugs are out. Should they have a blackish oil film on them? And #2 has black rings on the top of it (not carved in it). They are perfectly round and are spaced like a target. Is that something I should worry about?

 

I tune my race scooter by reading the plugs, and I want them coffee-with-milk brown..

(however, that's a 50cc, 14k revving 2-stroker putting out 14 whp..so I might be talking bollocks for that matter...)

 

I asked you for bmps, not jpgs. They're less compressed.

Plugs look fine to me, except the obvious loose one. You have some compression getting past in 3 & 4. Get a new set.

Ben