I've awaken the BEAST!!!!
Holy ****.....
My motor sounds BADASSSSSSSSS!!!!!!
I just started it for the first time, and the 260deg cams are pretty damn loppy, I can't stop laughing. I am gonna try to get a camera with a decent sound so you all can hear it.
For those of you that aren't familiar with the build......go **** yourselves :P
Seriously though, it has the following:
-MiataRoadster.com billet oil pump gears
-8.5:1 wiseco pistons
-Belfab (949Racing, take your pick...) Rods
-My own custom headwork (see results in braineacks dyno thread)
-Coated pistons, coated chambers, coated exhaust ports
-Custom ground cams from Integral cams, 263dur/9.8mm lift
-Shim under bucket solid lifter conversion
-Complete supertech valvetrain
and a bunch of other **** I'm sure I spent a fortune on...
Anyways, I also got a new job recently that pays like 3x what I'm currently making. For those also familiar with my inability to decide and keep what turbo I want to run will be happy to know that I will finally be able to afford to get the gt2871r or gt3071r that I really want!
Someone smack this smile off my face!
Brian
My motor sounds BADASSSSSSSSS!!!!!!
I just started it for the first time, and the 260deg cams are pretty damn loppy, I can't stop laughing. I am gonna try to get a camera with a decent sound so you all can hear it.
For those of you that aren't familiar with the build......go **** yourselves :P
Seriously though, it has the following:
-MiataRoadster.com billet oil pump gears
-8.5:1 wiseco pistons
-Belfab (949Racing, take your pick...) Rods
-My own custom headwork (see results in braineacks dyno thread)
-Coated pistons, coated chambers, coated exhaust ports
-Custom ground cams from Integral cams, 263dur/9.8mm lift
-Shim under bucket solid lifter conversion
-Complete supertech valvetrain
and a bunch of other **** I'm sure I spent a fortune on...
Anyways, I also got a new job recently that pays like 3x what I'm currently making. For those also familiar with my inability to decide and keep what turbo I want to run will be happy to know that I will finally be able to afford to get the gt2871r or gt3071r that I really want!
Someone smack this smile off my face!
Brian
Also, question....
Would a loppy idle cause the oil pressure gauge to wiggle very slightly, constantly? I hear no ping at all, I'm getting 13.3afr, and the motor runs great otherwise. Actually all the needles are vibrating a little.....ground maybe?
EDIT: I also have mmr mounts installed.
Would a loppy idle cause the oil pressure gauge to wiggle very slightly, constantly? I hear no ping at all, I'm getting 13.3afr, and the motor runs great otherwise. Actually all the needles are vibrating a little.....ground maybe?
EDIT: I also have mmr mounts installed.
nice. i could see a lopey idle affecting oil pressure. you might need a vac can for your brake booster and other vac fed items.
Yes.
My dad's 442 had no brakes at idle after he put the custom cam in. The vac canister did the trick.
My dad's 442 had no brakes at idle after he put the custom cam in. The vac canister did the trick.
Also, question....
Would a loppy idle cause the oil pressure gauge to wiggle very slightly, constantly? I hear no ping at all, I'm getting 13.3afr, and the motor runs great otherwise. Actually all the needles are vibrating a little.....ground maybe?
EDIT: I also have mmr mounts installed.
Would a loppy idle cause the oil pressure gauge to wiggle very slightly, constantly? I hear no ping at all, I'm getting 13.3afr, and the motor runs great otherwise. Actually all the needles are vibrating a little.....ground maybe?
EDIT: I also have mmr mounts installed.
Joined: Jun 2005
Posts: 19,338
Total Cats: 574
From: Fake Virginia
schweeeeeeeeeeeeeeet brian. i want this kind of awesome in my car fast.
one of you guys send me the phone vid and i'll upload it to youtube.
edit: did you get my email about the gasket? I can paypal whenever.
one of you guys send me the phone vid and i'll upload it to youtube.
edit: did you get my email about the gasket? I can paypal whenever.








