General Miata Chat A place to talk about anything Miata

limits of a miata motor?

Thread Tools
 
Search this Thread
 
Old 04-02-2010, 02:38 PM
  #41  
Newb
Thread Starter
 
weemanch's Avatar
 
Join Date: Apr 2010
Posts: 32
Total Cats: 0
Default

Originally Posted by cueball1
Problem is at the Honduh fanbois forums this kind of ignorant question is asked and answered on a daily basis. Other forums pander to this kind of ignorant thread instead of stopping them dead in their tracks as should happen. Do we need to be nicer to noobs at times? Absolutely. Do guys like Weepymanch need a fast hard dope slap? Absolutely.
you'd get one right back
weemanch is offline  
Old 04-02-2010, 02:39 PM
  #42  
VladiTuned
iTrader: (76)
 
18psi's Avatar
 
Join Date: Apr 2008
Posts: 35,821
Total Cats: 3,481
Default

Originally Posted by weemanch
i figure when revving out to 9k isn't that bad if you ask me no it's not the instaspool that you people maybe after for the road course or autox.
Originally Posted by weemanch
i looked threw about 10 threads of disco's. i know there is alot more threads so i said little....why don't you guys go have a circle jerk with gaymadeturbo.com

but to the guy that was helpful thank you.
Maybe if you learned how to properly form sentences and spell, then stopped making fail threads and actually did a bit of reading you'd understand where we are coming from.

But being you are from the hOnda Mad TytE jDm scene that is very unlikely.
18psi is offline  
Old 04-02-2010, 02:42 PM
  #43  
Newb
Thread Starter
 
weemanch's Avatar
 
Join Date: Apr 2010
Posts: 32
Total Cats: 0
Default

i fail at English, your stating the obvious there i knew this was before this ****.also with the honda comment dude seriously not needed considering, i like all type of cars. that should be obvious since i am looking at a damn miata.
weemanch is offline  
Old 04-02-2010, 02:46 PM
  #44  
Elite Member
 
Sparetire's Avatar
 
Join Date: Dec 2008
Location: Colorado
Posts: 1,642
Total Cats: 36
Default

Originally Posted by weemanch
i looked threw about 10 threads of disco's. i know there is alot more threads so i said little....why don't you guys go have a circle jerk with gaymadeturbo.com

but to the guy that was helpful thank you.
The circle jerks are threads that have nothing of value in them. Like yours. Which are generally found every 30 seconds on pretty much every damned forum out there anymore.

This and the DSMLink forums are the only ones I have seen lately that dont suck that way and the reason is that people get annoyed at stupid assed questions. Like this one. This is the only open public forum I have found recently that can be said of, where the DSMLink forums are protected by the fact that the only way to post on them is to have DSMLink, and the only people who even understand why one would own it are not asking stupid questions.

This forum will tolerate newbs just fine. I am one more or less. Just ******* use some puctuation and search for ****. Of my 500ish posts in here, I think I have started maybe 2 threads. I have learned enough to have a damned good idea of what car I want, how I will build it up, and what problems to look out for.

Sparetire is offline  
Old 04-02-2010, 02:47 PM
  #45  
Elite Member
 
Sparetire's Avatar
 
Join Date: Dec 2008
Location: Colorado
Posts: 1,642
Total Cats: 36
Default

Originally Posted by weemanch
i fail at English, your stating the obvious there i knew this was before this ****.also with the honda comment dude seriously not needed considering, i like all type of cars. that should be obvious since i am looking at a damn miata.
The perfect forum for you clubroadster.net

Also, there is one guy who really knows his ****. His SN is Hyper. Look him up. He will help you with all your stuff.
Sparetire is offline  
Old 04-02-2010, 02:49 PM
  #46  
VladiTuned
iTrader: (76)
 
18psi's Avatar
 
Join Date: Apr 2008
Posts: 35,821
Total Cats: 3,481
Default

Yeah Hyper is the smartest miata guy out there. Install his coolant re-route and you'll make the same power as turbo, WHILE N/A
18psi is offline  
Old 04-02-2010, 02:49 PM
  #47  
Elite Member
iTrader: (8)
 
webby459's Avatar
 
Join Date: Jun 2009
Location: Albany, NY
Posts: 1,461
Total Cats: 4
Default

Originally Posted by dustinb
Yah man, you got it. The real hard people who are here do a custom B20B swap with 18C head into our miata's. Custom log manifold with GT40, 4" downpipe, with direct exit. Screw that exhaust ****. Hondata OBD1 ECU, and that **** is insane.
I am exiting my 4" threw the front fender, right behind the drive wheel. NOS vented threw firewall. Custom, you say? **** right, bitch.
webby459 is offline  
Old 04-02-2010, 02:50 PM
  #48  
Elite Member
iTrader: (10)
 
Jeff_Ciesielski's Avatar
 
Join Date: Oct 2008
Location: Rhode Island
Posts: 1,770
Total Cats: 31
Default

Originally Posted by Sparetire
The perfect forum for you clubroadster.net

Also, there is one guy who really knows his ****. His SN is Hyper. Look him up. He will help you with all your stuff.
^ no bullshit.
On a serious note, be sure to ask hyper for details on his new intercooler system and coolant re-route. It is supposedly the latest and greatest **** out for 1.8l miatas now. Good luck with your project!
Jeff_Ciesielski is offline  
Old 04-02-2010, 02:50 PM
  #49  
Junior Member
iTrader: (1)
 
caideN's Avatar
 
Join Date: Jan 2010
Location: SF Bay Area
Posts: 140
Total Cats: 0
Default

Originally Posted by 18psi
Yeah Hyper is the smartest miata guy out there. Install his coolant re-route and you'll make the same power as turbo, WHILE N/A
Call your dad and setup an appointment up for me today!!!!!!! please thanks
caideN is offline  
Old 04-02-2010, 02:51 PM
  #50  
Newb
Thread Starter
 
weemanch's Avatar
 
Join Date: Apr 2010
Posts: 32
Total Cats: 0
Default

Originally Posted by 18psi
Yeah Hyper is the smartest miata guy out there. Install his coolant re-route and you'll make the same power as turbo, WHILE N/A
main reason i started this thread was cause i needed answers quick. i am buying the car next weekend if i do decide to buy it. which in turn leaves me with little time to be on here.
weemanch is offline  
Old 04-02-2010, 02:52 PM
  #51  
VladiTuned
iTrader: (76)
 
18psi's Avatar
 
Join Date: Apr 2008
Posts: 35,821
Total Cats: 3,481
Default

Originally Posted by caideN
Call your dad and setup an appointment up for me today!!!!!!! please thanks
today or tomorrow? I already made one for early tomorrow morning. You wanna stop by today? What time?
18psi is offline  
Old 04-02-2010, 02:53 PM
  #52  
Junior Member
iTrader: (1)
 
caideN's Avatar
 
Join Date: Jan 2010
Location: SF Bay Area
Posts: 140
Total Cats: 0
Default

Originally Posted by weemanch
main reason i started this thread was cause i needed answers quick. i am buying the car next weekend if i do decide to buy it. which in turn leaves me with little time to be on here.
If I were you I would do a bunch of research before buying the car/anything. I regret buying mine a little. It was a good learning experience, but the dude I bought it from had all bandaids and that's what I'm trying to replace right now.
caideN is offline  
Old 04-02-2010, 02:54 PM
  #53  
Junior Member
iTrader: (1)
 
caideN's Avatar
 
Join Date: Jan 2010
Location: SF Bay Area
Posts: 140
Total Cats: 0
Default

Originally Posted by 18psi
today or tomorrow? I already made one for early tomorrow morning. You wanna stop by today? What time?
I can get there at around 1-3pm today
caideN is offline  
Old 04-02-2010, 02:54 PM
  #54  
Elite Member
iTrader: (8)
 
webby459's Avatar
 
Join Date: Jun 2009
Location: Albany, NY
Posts: 1,461
Total Cats: 4
Default

Originally Posted by weemanch
main reason i started this thread was cause i needed answers quick. i am buying the car next weekend if i do decide to buy it. which in turn leaves me with little time to be on here.
I turbo'd my car in 20 mins, talk about needing answers quick. At that point, I told these bitches what's up, I am the man up in this ************, if I want to ask where to get a beefburger during my build, I expect a bitch to bring daddy that burger. If not, I'll **** a bitch up on this forum. Dig?
webby459 is offline  
Old 04-02-2010, 02:55 PM
  #55  
VladiTuned
iTrader: (76)
 
18psi's Avatar
 
Join Date: Apr 2008
Posts: 35,821
Total Cats: 3,481
Default

Originally Posted by webby459
I turbo'd my car in 20 mins, talk about needing answers quick. At that point, I told these bitches what's up, I am the man up in this ************, if I want to ask where to get a beefburger during my build, I expect a bitch to bring daddy that burger. If not, I'll **** a bitch up on this forum. Dig?
lol hustler....err...I mean webby
18psi is offline  
Old 04-02-2010, 02:57 PM
  #56  
Newb
Thread Starter
 
weemanch's Avatar
 
Join Date: Apr 2010
Posts: 32
Total Cats: 0
Default

the cars bone stock and my friend that knows lots about miata's has told me what to look for in buying a miata.which the cars a nice car just a tad over priced, but i'd take a tad over priced compared to what others are selling them for.along with why i asked about the motor and all that stuff, cause i dont know what kind of power they can withstand before failing.
weemanch is offline  
Old 04-02-2010, 02:57 PM
  #57  
Elite Member
iTrader: (8)
 
webby459's Avatar
 
Join Date: Jun 2009
Location: Albany, NY
Posts: 1,461
Total Cats: 4
Default

Originally Posted by 18psi
lol hustler....err...I mean webby
Let me tell you, 18. You will be the first to bring big daddy what the **** he wants.
webby459 is offline  
Old 04-02-2010, 02:59 PM
  #58  
Elite Member
iTrader: (8)
 
webby459's Avatar
 
Join Date: Jun 2009
Location: Albany, NY
Posts: 1,461
Total Cats: 4
Default

Damn, I made myself laugh in this thread.

Any time that happens, **** gets out of hand, and modgod deltrees my posts. Oh ******* well.
webby459 is offline  
Old 04-02-2010, 03:05 PM
  #59  
Elite Member
 
dustinb's Avatar
 
Join Date: Feb 2008
Location: Victoria, BC
Posts: 2,320
Total Cats: 13
Default

Originally Posted by weemanch
the cars bone stock and my friend that knows lots about miata's has told me what to look for in buying a miata.which the cars a nice car just a tad over priced, but i'd take a tad over priced compared to what others are selling them for.along with why i asked about the motor and all that stuff, cause i dont know what kind of power they can withstand before failing.
200-250whp without internals. You need lots of parts to reach that goal. Injectors, fuel rail, engine management, intercooler, downpipe, a 1.8 rear end if you're buying a 90-93, new radiator, possibly a coolant reroute, and some bracing for the car.

There you go.
dustinb is offline  
Old 04-02-2010, 03:10 PM
  #60  
VladiTuned
iTrader: (76)
 
18psi's Avatar
 
Join Date: Apr 2008
Posts: 35,821
Total Cats: 3,481
Default

spoon feed him your **** too
18psi is offline  


Quick Reply: limits of a miata motor?



All times are GMT -4. The time now is 02:39 PM.