can installing a BOV incorrectly result in a coolant leak?
#1
can installing a BOV incorrectly result in a coolant leak?
Today, while i was waiting for my tires to be mounted, i decided it would be a good time to install my bosch bypass valve.
So here's how i had it set up (of course the return isnt really that long, and the bov was clamped tight)
and the vac lines:
If in install a return for the bypass valve, do i need to disconnect the valve cover breather?
I had this all setup as in the pics, but when i started the car, coolant started shooting out of the thermostat. When i went to unplug the temp. sensor, the whole thing pulled out. Could that be what caused the coolant to leak out? Is there any way i pressurized the system so coolant would bust the gasket? Or do you think it's just a bad tstat gasket?
So here's how i had it set up (of course the return isnt really that long, and the bov was clamped tight)
and the vac lines:
If in install a return for the bypass valve, do i need to disconnect the valve cover breather?
I had this all setup as in the pics, but when i started the car, coolant started shooting out of the thermostat. When i went to unplug the temp. sensor, the whole thing pulled out. Could that be what caused the coolant to leak out? Is there any way i pressurized the system so coolant would bust the gasket? Or do you think it's just a bad tstat gasket?
#7
Elite Member
iTrader: (1)
Join Date: Jun 2007
Location: VA, Germany, Afghanistan
Posts: 2,945
Total Cats: 3
Not unless you messed with the thermostat during the install....even then installing it incorrectly wouldn't have resulted in the leak...stuipidity would have caused it. I'm voting coincidence.
#14
Elite Member
iTrader: (1)
Join Date: Jun 2007
Location: VA, Germany, Afghanistan
Posts: 2,945
Total Cats: 3
Hey it's possible...if the "backwards" condom breaks and you proceed to bash your head against a wall when you get the news of pregnancy a few weeks later...not necessarily a direct cause for the bloody nose but hey you get the idea. LOL
#18
Elite Member
iTrader: (1)
Join Date: Jun 2007
Location: VA, Germany, Afghanistan
Posts: 2,945
Total Cats: 3
EDIT: Nevermind, now that i look again i see the tape that appears to be covering the hole it was entering.
#19
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,080
I was wondering the same thing but assumed he just drew the line there because it's the general area its entering the pre-turbo charge pipe...then again with a question such as the thread title i guess we shouldn't assume anything. Doubt he'll respond in this thread again given some of the comments though.
EDIT: Nevermind, now that i look again i see the tape that appears to be covering the hole it was entering.
EDIT: Nevermind, now that i look again i see the tape that appears to be covering the hole it was entering.
you missed three deleted threads over at vadriven where AA and atif was called out...
#20
Elite Member
iTrader: (1)
Join Date: Jun 2007
Location: VA, Germany, Afghanistan
Posts: 2,945
Total Cats: 3
I saw two of them...just chose not to waste my time replying as i knew they would be deleted. I made a reference to that today in a different thread...what makes you say something about it here?