Part My 99 Turbo? EPIC build turned into parts car?
#1
Elite Member
Thread Starter
iTrader: (13)
Join Date: Oct 2006
Location: Atlanta, GA
Posts: 8,091
Total Cats: 7
Part My 99 Turbo? EPIC build turned into parts car?
So no one seems to want to buy a built and sorted turbo 99. Weird why would anyone want to save money and just drive the car they bought instead of building up their own piece of crap?
After the car's been online for like a year its time to sell it or part it.
Here's a general parts list.
I'd sell things accordingly.
-Turbo Kit w/ECU injectors and exhaust $1800
-Built Engine $1800
-Complete shocks, perches, springs, bumps $1000
-Front Sway bar RB 1.125 with braces and links $200
-Radiator $100
-6UL Wheels & Tires $650
-Rollbar Hard Dog HCDD $450
Engine:
Bored .030 over
Wiseco Forged 9:1 Pistons
Pauter Forged Rods
Timing belt, water pump, seals less than 10k miles ago
Adaptronic 420C parallel install
RX7 550cc high impedance injectors
AEM UEGO with gauge
Vgauges Boost Gauge and Water/Oil temp
2" Aluminum Radiator with stainless upper shroud
Spearco Intercooler
T3-60 trim
Tial 38mm External Wastegate
BEGI S5 manifold with external flange
Custom 3" stainless downpipe with wastegate merged back into main stream
Enthuza stainless 3" exhaust downpipe back
Suspension:
Koni sports
GC Coilovers
Eibach 525/350 springs
Fat Cat Motorsports 36mm bumpstops
Racing Beat 1.125 Hollow front sway
Racing Beat front sway bar brace kit
Gearhead Garage adjustable endlinks
949 6UL 15x8 wheels with steel stems and McGard two piece spline drive lug nuts
Falken Azenis 205/50r15 tires with 1/3 tread left
Axxis Ultimate Brake Pads Front and Rear with ATE Super Blue fluid
Other:
Hard Dog Hard Core Double Diagonal non-Hardtop rollbar
Voodoo shift ****
After the car's been online for like a year its time to sell it or part it.
Here's a general parts list.
I'd sell things accordingly.
-Turbo Kit w/ECU injectors and exhaust $1800
-Built Engine $1800
-Complete shocks, perches, springs, bumps $1000
-Front Sway bar RB 1.125 with braces and links $200
-Radiator $100
-6UL Wheels & Tires $650
-Rollbar Hard Dog HCDD $450
Engine:
Bored .030 over
Wiseco Forged 9:1 Pistons
Pauter Forged Rods
Timing belt, water pump, seals less than 10k miles ago
Adaptronic 420C parallel install
RX7 550cc high impedance injectors
AEM UEGO with gauge
Vgauges Boost Gauge and Water/Oil temp
2" Aluminum Radiator with stainless upper shroud
Spearco Intercooler
T3-60 trim
Tial 38mm External Wastegate
BEGI S5 manifold with external flange
Custom 3" stainless downpipe with wastegate merged back into main stream
Enthuza stainless 3" exhaust downpipe back
Suspension:
Koni sports
GC Coilovers
Eibach 525/350 springs
Fat Cat Motorsports 36mm bumpstops
Racing Beat 1.125 Hollow front sway
Racing Beat front sway bar brace kit
Gearhead Garage adjustable endlinks
949 6UL 15x8 wheels with steel stems and McGard two piece spline drive lug nuts
Falken Azenis 205/50r15 tires with 1/3 tread left
Axxis Ultimate Brake Pads Front and Rear with ATE Super Blue fluid
Other:
Hard Dog Hard Core Double Diagonal non-Hardtop rollbar
Voodoo shift ****
#3
Elite Member
Thread Starter
iTrader: (13)
Join Date: Oct 2006
Location: Atlanta, GA
Posts: 8,091
Total Cats: 7
Step in the right direction.
Claim stuff as you want it. If I part this I'll give you priority.
However turbo kit will be sold as a kit. The downpipe only fits this manifold/wg/turbo. Any variation in flange angles/heights will require all new downpipe.
Claim stuff as you want it. If I part this I'll give you priority.
However turbo kit will be sold as a kit. The downpipe only fits this manifold/wg/turbo. Any variation in flange angles/heights will require all new downpipe.
Thread
Thread Starter
Forum
Replies
Last Post
eddy1128
Miata parts for sale/trade
8
12-10-2015 05:34 PM
SuperSneakySecretSquirrel
Meet and Greet
5
09-06-2015 08:30 PM