seafoam!
#48
Junior Member
Thread Starter
iTrader: (1)
Join Date: Sep 2008
Location: seabrook nh
Posts: 396
Total Cats: 0
so i am in the process of selling this car(with a new motor) and i took out the motor today and looked it over(havnt cracked it open yet to look for damamges) but i broke all 4 bolts that hold the crank pully in place... im guessing if i open up the motor and its ok im thinking the problem was this
#53
Junior Member
Thread Starter
iTrader: (1)
Join Date: Sep 2008
Location: seabrook nh
Posts: 396
Total Cats: 0
engine internal pics!!!
heres pics from the 92 motor that i thought bent a rod
cyl#1
cyl #2
cyl#3
cyl #4
now if i bent a rod shouldnt the piston be at a diffrent height then its opposing cyl??
like cyl1 and cyl4 should be the same height and cyl 2 and cyl 3 should be the same as well
heres pics from the 92 motor that i thought bent a rod
cyl#1
cyl #2
cyl#3
cyl #4
now if i bent a rod shouldnt the piston be at a diffrent height then its opposing cyl??
like cyl1 and cyl4 should be the same height and cyl 2 and cyl 3 should be the same as well
#54
nvm. losing a drain plug on the highway and refilling and driving cuz 'it seemed just fine' and then believing that everything is ok because you looked inside the valve cover and 'it all looked brand new' somehow makes this new version of the story meaninless....
nice bust zoomin....
nice bust zoomin....
Last edited by superslow; 09-11-2009 at 03:39 AM. Reason: Truth was revealed....
#55
Elite Member
iTrader: (15)
Join Date: Dec 2007
Location: San Antonio, Texas
Posts: 4,847
Total Cats: 27
The pistons 'look' like they are all the same distance (in sets) from the top but hard to say for sure without a micrometer. Otherwise, lots of carbon buildup, and the cylinder walls look pretty glazed, no honing marks visible.
#57
Elite Member
iTrader: (13)
Join Date: Dec 2006
Location: Taos, New mexico
Posts: 6,611
Total Cats: 567
bayside blue, isn't this what happened tick or knock? - MX-5 Miata Forum
The motor is fucked man.. and not from bent rods. Its from dead bearings because the lack of oil.. Get a junkyard motor and move on with life.
#58
Junior Member
Thread Starter
iTrader: (1)
Join Date: Sep 2008
Location: seabrook nh
Posts: 396
Total Cats: 0
Lmfao. Why post an entirely different story on another forum? Should told us the same story so you could have gotten a more straight forward answer.
The motor is fucked man.. and not from bent rods. Its from dead bearings because the lack of oil.. Get a junkyard motor and move on with life.
The motor is fucked man.. and not from bent rods. Its from dead bearings because the lack of oil.. Get a junkyard motor and move on with life.
i swaped motors and put my 91 in it, then i lost my drain plug in that motor..2 diffrent motors and ive torn down that motor as well and took pics
braineack said he wanted pics of bent rods and melted pistons.. i havnt had the time to pull the oil pan yet t oget rod pics but they will be coming soon(hopefully)
Thread
Thread Starter
Forum
Replies
Last Post
Engi-ninja
Engine Performance
22
06-09-2015 10:18 AM
ericsbestshot
DIY Turbo Discussion
4
10-30-2013 01:17 PM