FM hood louvers
#1
FM hood louvers
Has anyone installed them, and where on a MSM-NB hood? Flyin' Miata : Body : Body parts : Flyin` Miata aluminum louver panel
Most text suggest the rear 25% of the hood but the pressure layout on FM's site seems to show the lowest pressure area to be closer to the headlight(s).
Thanks
Phil
Most text suggest the rear 25% of the hood but the pressure layout on FM's site seems to show the lowest pressure area to be closer to the headlight(s).
Thanks
Phil
#4
Elite Member
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,677
Total Cats: 800
I bought 2 of these. They will be getting put on my NA during the winter/spring sometime. Mine will go more close to the center of the hood, and a little further towards the headlights. Probably around the bump in the middle of the hood. But i like the idea of having it above the turbo to let some of that heat escape once i stop driving the car, and i turn it off. I'm not really worried about "flow" through my radiator, as much as i am worried about getting the warm air out of the bay. Mainly getting that hot air out and away from where the turbo is.
#5
I was thinking the same, but moving them more towards the out edge of the hood. One thing that may dictate the position is the hood bracing. The trick I feel is to remove the bracing, to promote better air flow, and to use the louver as a bridge between the cuts which may necessitate the addition of a few rivets!
#6
Senior Member
iTrader: (1)
Join Date: Jan 2011
Location: Chattanooga, Tn
Posts: 1,234
Total Cats: 283
I have these Size Large Hood Louvers (11″X 17″) | Hood Vents For Your Vehicle – RunCool Hood Louvers
They look great and are actually engineered to be functional.
They look great and are actually engineered to be functional.
#10
Former Vendor
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,100
Got some tuft testing to show us? Looks like they are way, way too far back to do anything but vent heat at rest.
If you want an effective duct at speed, it needs to be where Trey's duct is. Nowhere else works nearly as well.
If you want an effective duct at speed, it needs to be where Trey's duct is. Nowhere else works nearly as well.
#20
Senior Member
iTrader: (1)
Join Date: Jan 2011
Location: Chattanooga, Tn
Posts: 1,234
Total Cats: 283
I placed 4 thermocouples under the hood and did before and after testing. I saw an average 52 degree drop in under hood ambient air temps, 11 degree drop in water temp and 23 degree drop in intake air temps. I didn't put it in a wind tunnel to test it though.