MikeRiv87

iTrader: (12)

I'm trying to finish the coil Harness for my 1.6L and I stuck at the last step. Which diagram to I follow to wire it as a plug and play? I ask because the wire colors and pin locations do not match unless I'm looking at it wrong. They are both supposed to be for a 1.6L. What Gives???
Diagram 1:


or
Diagram 2:

MikeRiv87

iTrader: (12)

Just for example in the D1 it says the Brown/yellow is the trigger for coil 1 & 4 and in D2 the trigger for coil 1 & 4 is listed as a thick blue wire.

paul

iTrader: (21)

Fail

Savington

iTrader: (31)

fail

Ben

iTrader: (33)

Ignore the text on "diagram 2"

MikeRiv87

iTrader: (12)

That what I eventually did, Thanks Ben. COPS Working Great.

Ben

iTrader: (33)

Sweet, mine do too. I've got a .045" gap which doesn't blow out up to 17 psi or so. Haven't tested further with my little turbo and stock motor.

MikeRiv87

iTrader: (12)

Going to open the gap first thing in the morning. Then i suspect i will be getting the most out of the cop setup.

cjernigan

iTrader: (13)

Replying to one of your threads so you quit pissing and moaning to Paul trying to find a father figure.
Check the gap in your vagina while you're at it.