What problem is the poopstain on your existence?
#1
Elite Member
Thread Starter
iTrader: (12)
Join Date: Sep 2007
Location: Charlotte, NC
Posts: 6,850
Total Cats: 71
What problem is the poopstain on your existence?
I swear, we all have them. For some it's cooling or suspension...or maybe an electrical issue. For me, it's coolant leaks. I swear I am constantly finding little things here and there. Kinda like the old saying about if a Porsche isn't leaking oil that there is something wrong...if I am not smelling a hint of coolant when I park, then something must be wrong
-Replaced a turbo water line last weekend...that was new when I swapped the engine back in July.
-Replaced bothe heater hoses after one started leaking in August.
-Front block-off plate for the coolant reroute started weeping a couple weeks ago and I had to put a new gasket on it.
-Last night my lower radiator hose had to be replaced.
-Oh and right after I did the swap, one of the coolant lines to the throttle body popped off at WOT and covered the engine bay in coolant.
-Another leak I had was at the upper radiator hose and the radiator that caused the lexan shroud to degrade and crack apart.
-Replaced turbo coolant lines 3 or 4 times in the past 3 years.
-Water line from the back of the block to the oil cooler decided to split one day.
I swear I just need to hard line/banjo fitting EVERYTHING I can get my hands on
So what issues constantly nag at you/your car?
-Replaced a turbo water line last weekend...that was new when I swapped the engine back in July.
-Replaced bothe heater hoses after one started leaking in August.
-Front block-off plate for the coolant reroute started weeping a couple weeks ago and I had to put a new gasket on it.
-Last night my lower radiator hose had to be replaced.
-Oh and right after I did the swap, one of the coolant lines to the throttle body popped off at WOT and covered the engine bay in coolant.
-Another leak I had was at the upper radiator hose and the radiator that caused the lexan shroud to degrade and crack apart.
-Replaced turbo coolant lines 3 or 4 times in the past 3 years.
-Water line from the back of the block to the oil cooler decided to split one day.
I swear I just need to hard line/banjo fitting EVERYTHING I can get my hands on
So what issues constantly nag at you/your car?
#7
Elite Member
Thread Starter
iTrader: (12)
Join Date: Sep 2007
Location: Charlotte, NC
Posts: 6,850
Total Cats: 71
I have those...but I ignore them in fear I'll constantly be f*king with it
I just tell myself "Oh that's the sway bar endlinks making noise because they're those fancy helm-joint deals and I had those on the steering rack on my gocart and they were clankity on that too."
I just tell myself "Oh that's the sway bar endlinks making noise because they're those fancy helm-joint deals and I had those on the steering rack on my gocart and they were clankity on that too."
#10
Elite Member
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,977
Total Cats: 356
I have those...but I ignore them in fear I'll constantly be f*king with it
I just tell myself "Oh that's the sway bar endlinks making noise because they're those fancy helm-joint deals and I had those on the steering rack on my gocart and they were clankity on that too."
I just tell myself "Oh that's the sway bar endlinks making noise because they're those fancy helm-joint deals and I had those on the steering rack on my gocart and they were clankity on that too."
I hate my life for choosing the Energy Suspension bushings. That was a mistake I have to live with every time I go over a bump on the street, you can hear the rubber compressing like you've put it near a mic and you've cranked up the volume to 11 out of 10.
#11
Elite Member
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
Rattles in the car. I track down and fix one, 3 new ones appear. All the more reason to just strip the interior bare (replacing things I need like carpet), get a hard top, and drive it. Most of the rattles are soft top frame related I think. I've pretty much given up on fixing them though, been doing it for 3 years and it's just impossible, especially with the terrible roads we have around here.
#12
That's why I never got that bushing kit. I remember reading soo many reviews about them and everyone said the same thing.
There's been a lot of little **** here and there over the years that used to drive me crazy. I went through a period when I would pop off a coupler every other week, same with vac lines. When I had the 16x8 sportmaxx wheels I couldn't drive over 5mph without it rubbing the **** out of the tire and throwing chunks of rubber behind me. The normal hardtop and chassis noises started to really bother me.
The thing I hate most about my car?
Probably that I only drive it a couple months out of the year. For some reason it always seems to be the winter months.
#14
Elite Member
Thread Starter
iTrader: (12)
Join Date: Sep 2007
Location: Charlotte, NC
Posts: 6,850
Total Cats: 71
When you pay top dollar to get the Ohlins and the sealed Powergrid endlinks ($170 per pair, ffs), the last thing you expect is squeaking after 6 months.
I hate my life for choosing the Energy Suspension bushings. That was a mistake I have to live with every time I go over a bump on the street, you can hear the rubber compressing like you've put it near a mic and you've cranked up the volume to 11 out of 10.
I hate my life for choosing the Energy Suspension bushings. That was a mistake I have to live with every time I go over a bump on the street, you can hear the rubber compressing like you've put it near a mic and you've cranked up the volume to 11 out of 10.
#19
gear crunchiness. It has Motorcraft fluid I just did the change 2k mi ago and every gear still feels a bit like ****. I might change to Redline in the next week or two...
3k exhaust raspiness. I'm going to soak the heatshield bolts in PB over the next few days and take the **** off and see what happens. If that doesn't work, I need a new cat or header...
3k exhaust raspiness. I'm going to soak the heatshield bolts in PB over the next few days and take the **** off and see what happens. If that doesn't work, I need a new cat or header...