Boundary Engineering and WeaponX Coil On Plug PNP Pre-Order List
09-29-2009, 08:37 AM
#161
Elite Member
Thread Starter
iTrader: (9)
Join Date: Jun 2008
Location: Houston, TX
Posts: 1,547
Total Cats: 13
I will write an email today to everyone giving an update. We selected a manufacturer and will be recieving the protoboard today for one model of Miata, the 94-00. If it works as intended they will start production.
We have about 15 to get out the door yet.
We have about 15 to get out the door yet.
0
10-01-2009, 01:36 PM
#163
Looking forward to you finally obtaining a solution, its been a tough road, but I appreciate you deterimination to do this correctly despite the displeasure from GB members.
As soon as it's figured out I'm going to be buying these as my christmas gift :^)
As soon as it's figured out I'm going to be buying these as my christmas gift :^)
0
10-02-2009, 12:27 AM
#166
Elite Member
Thread Starter
iTrader: (9)
Join Date: Jun 2008
Location: Houston, TX
Posts: 1,547
Total Cats: 13
I didn't put you on the email list. Sorry about that. i'll send you a copy tomorrow.
Travis, I was wondering on a status of my refund? Unless of course you can get the COPS to me ASAP I'd still like that refund...Getting tired of waiting.
Travis
0
10-07-2009, 08:13 PM
#168
Elite Member
Thread Starter
iTrader: (9)
Join Date: Jun 2008
Location: Houston, TX
Posts: 1,547
Total Cats: 13
Hello Thymer,
I sent out an email a couple days ago. At any rate, this week they are on vacation. Next week we are waiting, and the week after is manufacturing week.
Best Regards,
Travis
I sent out an email a couple days ago. At any rate, this week they are on vacation. Next week we are waiting, and the week after is manufacturing week.
Best Regards,
Travis
0
10-07-2009, 10:05 PM
#169
Timeline: Right now we’re looking at a timeline of about 2 weeks before we begin shipping again. We have to select a new manufacturer and give them time to start. We are still producing units and going through the list, but we would not expect many to come before the next 2 weeks. When the new manufacturer comes online we expect a throughput that will almost immediately fill all orders.
0
10-07-2009, 10:12 PM
#170
Elite Member
Thread Starter
iTrader: (9)
Join Date: Jun 2008
Location: Houston, TX
Posts: 1,547
Total Cats: 13
Wed 9/30/2009 6:57 PM
Hello Purchasers,
Just filling in with an update on the coil systems. We have selected our manufacturer, and the proto board worked out just fine. The company is on vacation next week, and then we’ll be waiting a week to get into line on the manufacturing que. The intended ship window is the 15-21st of October.
That was the email that was sent out.
Hello Purchasers,
Just filling in with an update on the coil systems. We have selected our manufacturer, and the proto board worked out just fine. The company is on vacation next week, and then we’ll be waiting a week to get into line on the manufacturing que. The intended ship window is the 15-21st of October.
That was the email that was sent out.
0
10-14-2009, 03:23 AM
#171
I'm very tempted to order this for my MSM, as my homebuilt COPS project failed and I'm too lazy to keep throwing effort / time / money at it.
Can anyone who DID get their order and install these coils (in an NB, please) tell me how they worked out for you?
So far, Travis has been nothing but a mensch in several private conversations with me. However I'd like to see a bit more real-world assurance before I hand over 440 of my dollars.
Can anyone who DID get their order and install these coils (in an NB, please) tell me how they worked out for you?
So far, Travis has been nothing but a mensch in several private conversations with me. However I'd like to see a bit more real-world assurance before I hand over 440 of my dollars.
0
10-14-2009, 03:38 AM
#172
Elite Member
Join Date: Mar 2008
Location: Enschede, NL
Posts: 2,053
Total Cats: 12
Wed 9/30/2009 6:57 PM
Hello Purchasers,
Just filling in with an update on the coil systems. We have selected our manufacturer, and the proto board worked out just fine. The company is on vacation next week, and then we’ll be waiting a week to get into line on the manufacturing que. The intended ship window is the 15-21st of October.
That was the email that was sent out.
Hello Purchasers,
Just filling in with an update on the coil systems. We have selected our manufacturer, and the proto board worked out just fine. The company is on vacation next week, and then we’ll be waiting a week to get into line on the manufacturing que. The intended ship window is the 15-21st of October.
That was the email that was sent out.
- this is still the manufacturer of choice?
- they are back open after holiday since Monday
- we are still in line for end of this week/early next week
Can you also update on the build order? Specifically, where am I?
0
10-15-2009, 04:42 PM
#174
Elite Member
Thread Starter
iTrader: (9)
Join Date: Jun 2008
Location: Houston, TX
Posts: 1,547
Total Cats: 13
Everything does look good on the path we're on. The manufacturer came back, and its looking like the end of next week/beginning of the week after they will be shipping the product. So for the most part our tentative time line is still solid. Once we recieve them I'll be shipping them out as soon as I get them. I've got the boxing and everything ready to go.
I'll have to get back to everyone on the lists, because things have changed ALOT over the last couple of weeks. Some people got refunds, and some people bought in, and as a result my old list needs to be updated.
I'll have to get back to everyone on the lists, because things have changed ALOT over the last couple of weeks. Some people got refunds, and some people bought in, and as a result my old list needs to be updated.
0
10-24-2009, 07:47 AM
#175
Everything does look good on the path we're on. The manufacturer came back, and its looking like the end of next week/beginning of the week after they will be shipping the product. So for the most part our tentative time line is still solid. Once we recieve them I'll be shipping them out as soon as I get them. I've got the boxing and everything ready to go.
I'll have to get back to everyone on the lists, because things have changed ALOT over the last couple of weeks. Some people got refunds, and some people bought in, and as a result my old list needs to be updated.
I'll have to get back to everyone on the lists, because things have changed ALOT over the last couple of weeks. Some people got refunds, and some people bought in, and as a result my old list needs to be updated.
0
10-24-2009, 12:10 PM
#176
Elite Member
Thread Starter
iTrader: (9)
Join Date: Jun 2008
Location: Houston, TX
Posts: 1,547
Total Cats: 13
They got 3-4 days behind on their ship dates so I haven't seen them yet. All the better, as I just got the coils and other parts I need to package along with it shipped to me. The original builder was reluctant to fully relinquish everything.
Best,
Travis
Best,
Travis
0
10-26-2009, 10:11 PM
#177
I'm in!
Hoping to get these before Nov. 14 Dyno Day .... I hope I hope I hope ......
As I understand it, these super-high-end COPS will make my car idle smoother, get rid of the misfires at boost, and elongate my *******.
I'll settle for 2 out of 3.
PS - I really want these before Dyno Day, but Travis says his upcoming batch of 16 units is already sold out. Is anyone willing to give me their spot? My birthday is this week, consider it a present!!
Hoping to get these before Nov. 14 Dyno Day .... I hope I hope I hope ......
As I understand it, these super-high-end COPS will make my car idle smoother, get rid of the misfires at boost, and elongate my *******.
I'll settle for 2 out of 3.
PS - I really want these before Dyno Day, but Travis says his upcoming batch of 16 units is already sold out. Is anyone willing to give me their spot? My birthday is this week, consider it a present!!
Last edited by evank; 10-27-2009 at 08:54 PM.
0
10-27-2009, 02:46 AM
#178
Elite Member
Join Date: Mar 2008
Location: Enschede, NL
Posts: 2,053
Total Cats: 12
0
10-27-2009, 07:52 AM
#180
Elite Member
Join Date: Mar 2008
Location: Enschede, NL
Posts: 2,053
Total Cats: 12
0
