I am lazy, dur.

Never know he might have extra units around for ppl that didn't follow up. Can't hurt to ask.

I'm currently not taking any more orders until I have all the pending orders delivered.

I will let you know when that happens.

goddamn homeland security takes over a week to verify something isn't a bomb... not surprising

They asked me for some documents yesterday, which is a good sign.

still stuck in customs?

Your item cleared United States Customs at 11:29 pm on December 12, 2011.

W00t!

Your item was delivered at 12:35 pm on December 14, 2011

I should have individual tracking numbers for you lot by tomorrow. Anyone that sent the payment as a gift, PM me your shipping address.

I got nothing. :vash:

Time to go beat up the office and see if it's there.

No news for the other persons who wait for their Megasquirt?

Thank you

They are ready to ship on Monday (I'm deliberately not saying tomorrow), I'll PM you (and everyone else) with your tracking number.

I'm building the third batch of units, yours is after this next batch.

- bigx5murf, please send me your full name (your paypal payment doesn't show it)
- 85z28, please send me an address that google maps recognizes

Just sent, sorry about that

Did you guys receive your tracking numbers in your emails?

Yes sir.

Will there be another chance to get one after this GB is complete?

Yes, of course.

I got mine

All I got was an email asking me to confirm my shipping address, which I did. No tracking number yet.

Is this the FedEx one from Bill at Miataroadster? Then Yes.

That's the one!

PM sent with your tracking number.

Got it, thanks Rev!

Mine just arrived! Now it's time to get to work!

I'm so jealous.

Moar ECUs delivered. :)

Instructions for my unit?

missed my delivery, also found out my doorbell is broken, even worse i have a pbx based doorbell... repair costs FTL

Emails sent out with instructions and the required .ini file. If anyone is missing it, let me know.

https://www.miataturbo.net/attachmen...ine=1324736907

Could you tell me what these 5 wires are for? 90 to 93 1.6 harness

Step 34 in the instructions I sent you:

a) Yellow - Wideband input. Connect this to your wideband analog output
b) Grey - Switchable tables. Connect this to a ground (through an on/off
switch) to switch between VE/Ignition tables.
c) Brown - Launch control. Connect this to a ground (through an on/off switch)
to switch launch control on/off.
d) Violet (purple) - Boost control low/high. Connect this to a ground
(through an on/off switch) to switch between low/high boost tables.
e) Green - Boost control output. Connect this to a boost control valve. The
other wire of the boost control valve needs to be connected to a switched and
fused 12V source. A 5A fuse is recommended.

My mistake.... also what is it going to take to run sequential?

You will need to convert your engine (injector) harness to sequential first. I would advise that you first get the car up and running as-is, then I can you give complete instructions on how to do it.

Hi Rev,
My unit arrived today. Please send instructions for #10158. Thanks
Happy Holidays



"MAY THE HOLIDAYS BRING YOU JOY AND WONDER,
WHILE YOUR STEERING BE OVER, RATHER THAN UNDER."

For the launch control, would I hook it up to the switch behind the clutch pedal?

I've already sent you the instructions, make sure they are not in a spam folder etc. If not let me know and I'll send them again.

That would work, yes.

As for the COPs, do I still need to put a 1k ohm resistor in the wiring or has the issue been addressed inside the ms2?

You still need the resistor, said wiring never reaches the MS somehow, so there is nothing that the MS2 can do to help in that direction.

MS2 finally showed up.... Harness wires are so short :vash::confused::mad::eek4::ugh::nuts::td::nono:

Times to start cutting and extending before i can install.

fedex tracking shows mine as not moving for 5 days? I really dislike fedex.....

My fedex tracker is showing the same for an item I bought. I think they either broke the system, or something is seriously effed with fedex.

How longer would you prefer them to be? Genuine question here. I've installed two of these so far in local's cars and didn't have any problems with the wires being "short", however these being euro cars, the ECU location is the same as in the 90-93 cars.

Also, I would advise that you first test start the car before cutting and extending.

I was home all day friday waiting for another package, and tracking was working fine on the 23rd. But for this package, its been stuck on the 22nd.

On a american nb the ecu is above the steering shaft. On my 99 it's fine as i will remove the stock ecu and everything else under the dash to lose weight and have easy access but the 02 the stock ecu will be left in for emotions testing easy switching.

But seeing as i'm going with the hot swap set up with my 99 and 02 and 2 different map tunes. I would need the ecu somewhere like the glove box or passenger side firewall to make it easy to quickly remove and install.

Which of these should i order?
http://www.diyautotune.com/catalog/m...ong-p-452.html
http://www.diyautotune.com/catalog/m...ong-p-101.html

You will need two of the normal (not the MS3X) wiring bundles, the top DB37 has 27 wires while the bottom one has 15 wires.

I would also recommend that you use TXL "thinwall" wiring instead - it is lighter, tougher and more flexible.

I really only need to make the 02 harness longer. Can you give me a link to what your talking about or are you saying get http://www.diyautotune.com/catalog/m...ong-p-101.html

OK, so aside from FedEx phailing me hard... I need longer harness too? Or can I order an extension?

I know the connectors are the expensive parts. That's why cutting and extending is more cost effective.

b) Grey - Switchable tables. Connect this to a ground (through an on/off
switch) to switch between VE/Ignition tables.
c) Brown - Launch control. Connect this to a ground (through an on/off switch)
to switch launch control on/off.
d) Violet (purple) - Boost control low/high. Connect this to a ground

what if i'm not using any of these?

At the least use switchable tables. I make a 91 octane table for you when you can't run 93.

Tape them away!

Hi Rev,
Thanks for everything so far. I needed to know what boost control valve you would use so I can start sourcing one.
Happy New Year!
:yippee:

The one from DIYAutoTune.com works well!

Cars starts on first try (with out the car in gear) and smokes like a 50s , running richer then the gauge can read. Have to remove a butt load of fuel.

Be happy that it starts. I can make it run right in about 15 minutes. You're going to like this computer so much more than Failtronic.

don't do anything with them. Just tape them off so they cant accidentally touch a ground and trigger a switched table/launch.

So hook then all to a 12v power?